Advertisement
Quick Links
KL1108VN / KL1116VN
Cat 5 Dual Rail LCD KVM over IP Switch
Quick Start Guide
© Copyright 2021 ATEN
ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their respective owners.
Part No. PAPE-1223-G71G
®
International Co. Ltd.
Released: 12/2021
Advertisement
Related Manuals for ATEN KL1108VN
Summary of Contents for ATEN KL1108VN
- Page 1 Quick Start Guide © Copyright 2021 ATEN ® International Co. Ltd. ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners. Part No. PAPE-1223-G71G Released: 12/2021...
- Page 2 Package Contents 1 KL1108VN / KL1116VN Cat 5 Dual Rail LCD KVM over IP Switch with a Standard Mounting Kit 2 SA0142 Serial Adapters (RJ45-F to DB9-M; DTE to DCE) 1 power cord 2 L brackets 1 user instructions Hardware Overview...
-
Page 3: Single Station Installation
Installation Rack Mount L Brackets Side Mounting Bracket (Typ.) Single-Station Installation Power Network Cat 5e/6 RS-232 VGA / DVI Modem Network Switch... -
Page 4: Hardware Overview
KL1108VN / KL1116VN Cat 5 Dual Rail LCD KVM over IP Switch Hardware Overview upper handle grounding terminal LCD module power socket keyboard module power switch lower handle PON port power LED serial 2 port (secondary) keyboard release catch LAN 2 port (secondary) - Page 5 12.7 cm at the back for the power cord and cables. 3. Download the user manual from our website for detailed instructions for other rack mount options at www.aten.com (the 2 L brackets included in the package contents are used).
-
Page 6: Operation
3. Use Cat 5e cables to connect any available KVM port to a KVM Adapter Cable. 4. Connect the KVM Adapters to the servers. 5. Plug a cable from the LAN into the KL1108VN/KL1116VN’s primary LAN port or secondary LAN port. - Page 7 The Port Toolbar The KVM over IP switch’s interface provides a toolbar to help you with port switching operations from within the captured port. First, make sure the OSD Hotkey is enabled by going to Port Access > User Preferences on the web interface and selecting [Scroll Lock] or [Ctrl] from the OSD Hotkey drop-down list.
- Page 8 To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/ Technical Support www.aten.com/support...
Need help?
Do you have a question about the KL1108VN and is the answer not in the manual?
Questions and answers