Red Hat ENTERPRISE LINUX 5 - VIRTUALIZATION GUIDE Manual page 328

Chapter 30. Xen configuration files
Parameter
nics=NUM
root=DEVICE
extra=ARGS
ip=IPADDR
gateway=IPADDR
netmask=MASK
hostname=NAME
interface=INTF
dhcp=off|dhcp
nfs_server=IPADDR
nfs_root=PATH
device_model=FILE
fda=FILE
fdb=FILE
serial=FILE
localtime=no | yes
keymap=FILE
usb=no | yes
usbdevice=NAME
stdvga=no | yes
isa=no | yes
boot=a|b|c|d
nographic=no | yes
soundhw=audiodev
vnc
vncdisplay
vnclisten
vncunused
sdl
display=DISPLAY
314
Description
created correctly on the system where a domain
is started or resumed.
DEPRECATED. Use empty vif entries instead.
Set the number of network interfaces. Use the vif
option to define interface parameters, otherwise
defaults are used. Specifying vifs will increase
the number of interfaces as needed.
Set the root= parameter on the kernel
command line. Use a device, e.g. /dev/sda1,
or /dev/nfs for NFS root.
Set extra arguments to append to the kernel
command line.
Set the kernel IP interface address.
Set the kernel IP gateway.
Set the kernel IP netmask.
Set the kernel IP hostname.
Set the kernel IP interface name.
Set the kernel dhcp option.
Set the address of the NFS server for NFS root.
Set the path of the root NFS directory.
Path to device model program.
Path to fda
Path to fdb
Path to serial or pty or vc
Is RTC set to localtime
Set keyboard layout used
Emulate USB devices
Name of a USB device to add
Use std vga or Cirrus Logic graphics
Simulate an ISA only system
Default boot device
Should device models use graphics?
Should device models enable audio device?
Should the device model use VNC?
VNC display to use
Address for VNC server to listen on.
Try to find an unused port for the VNC server.
Only valid when vnc=1.
Should the device model use SDL?
X11 display to use