Trouble Beginning The Installation; Is Your Mouse Not Detected; Trouble During The Installation; No Devices Found To Install Red Hat Enterprise Linux Error - Red Hat ENTERPRISE LINUX 3 - INSTALLATION GUIDE FOR IBM ESERVER ISERIES AND IBM ESERVER PSERIES Installation Manual

48 Appendix B. Troubleshooting Your Installation of Red Hat Enterprise Linux
B.2. Trouble Beginning the Installation
B.2.1. Is Your Mouse Not Detected?
This information does not apply to users of iSeries systems or users of LPAR-able pSeries systems.
If the Mouse Not Detected screen (refer to Figure B-1) appears, then the installation program was
not able to identify your mouse correctly.
You can choose to continue with the GUI installation or use the text mode installation, which does
not require using a mouse. If you choose to continue with the GUI installation, you must provide
the installation program with your mouse configuration information (refer to Section 2.12 Mouse
Configuration).
Figure B-1. Mouse Not Detected
B.3. Trouble During the Installation
B.3.1. Error
No devices found to install Red Hat Enterprise Linux

Message

If you receive an error message stating
No devices found to install Red Hat Enterprise
, there is probably a SCSI controller that is not being recognized by the installation program.
Linux
Check your hardware vendor's website to determine if a driver diskette image is available that fixes
your problem. Second, add to the IPL parameters line in the Network Storage Description. For
dd
more general information on driver diskettes, refer to Appendix D Driver Media.
You can also refer to the Red Hat Hardware Compatibility List, available online at:
http://hardware.redhat.com/hcl/
B.3.2. Saving Traceback Messages Without a Diskette Drive
If you receive a traceback error message during installation, you can usually save it to a diskette.