Red Hat DIRECTORY SERVER 8.1 - INSTALLATION GUIDE 11-01-2010 Installation Manual page 23

Setup Screen Parameter
Input
Set the 9830
Administration
Server port
Set the blank (all
Administration interfaces)
Server IP
address
Set user as nobody (on
which the Red Hat
Administration Enterprise
Server runs Linux) or
daemon (on
HP-UX)
Are you ready Yes or no
to configure
your servers?
This option is only available if you choose to register the Directory Server instance with a Configuration Directory Server.
This option is only available if you choose not to register the Directory Server instance with a Configuration Directory Server. In
that case, the Directory Server being set up is created and configured as a Configuration Directory Server.
Table 1.2. Comparison of Setup Types
Express Typical
Overview of Setup
Custom Silent Setup
File Parameter
[admin]
Port= 9830
[admin]
ServerIpAddress=
111.11.11.11
[admin]
SysUser=
nobody
N/A
13