Red Hat DIRECTORY SERVER 8.1 - INSTALLATION GUIDE 11-01-2010 Installation Manual page 20

Chapter 1. Preparing for a Directory Server Installation
accept them or substitute with alternatives. There are three kinds of setup modes, depending on what
you select when you first launch the setup program:
• Express — The fastest setup mode. This requires minimal interaction and uses default values for
almost all settings. Because express installation does not offer the choice of selecting the Directory
Server server port number or the directory suffix, among other settings, Red Hat recommends that
you not use it for production deployments. Also, express setups can fail if default configuration
values are not available because there is no way to offer an alternative.
• Typical — The default and most common setup mode. This prompts you to supply more detailed
information about the directory service, like suffix and configuration directory information, while still
proceeding quickly through the setup process.
• Custom — The most detailed setup mode. This provides more control over Administration Server
settings and also allows data to be imported into the Directory Server at setup, so that entries are
already populated in the databases when the setup is complete.
The information requested with the setup process is described in
Types".
There is a fourth setup option, silent setup, which uses a configuration file and command-line options
to supply the Directory Server settings automatically, so there is no user interaction required. It is also
possible to pass setup arguments with the script, as described in
admin.pl Script". The possible .inf setup file parameters are listed and described in
"About .inf File Parameters".
NOTE
It is possible to use y and n with the yes and no inputs described in
"About .inf File
Setup Screen Parameter
Input
Continue with Yes or no
setup
Accept license Yes or no
agreement
Accept Yes or no
dsktune
output and
continue with
setup
Choose setup • 1 (express)
type
• 2 (typical)
• 3 (custom)
Set the ldap.example.com
computer name
10
Parameters".
Express
Table 1.2, "Comparison of Setup
Section 1.3, "About the setup-ds-
Typical Custom
Section 5.5.5,
Section 5.5.5,
Silent Setup
File Parameter
N/A
N/A
N/A
N/A
[General]
FullMachineName=
ldap.example.com