FCC COMPLIANCE: This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.) this equipment may not cause harmful interference, and 2.) this equipment must accept any interference received, including interference that may cause undesired operation.
Page 4
These situations exceed tested limits and can result in loss of some functions for 24 hours after the dive in which a violation occurred. ! WARNING: NEVER use the transmitter as a handle when attached to a regulator and tank.
Page 5
CONNECTING 1. Enter your transmitter’s code (Fig. 1) into your computer. Details can be found in your computer’s operation manual. 2. Install an assembled transmitter and regulator onto a SCUBA tank (Fig. 2). Then slowly open the valve. 3. With your computer in Dive or Gauge mode, hold it near (Fig. 3) the transmitter.
Need help?
Do you have a question about the TRANSMITTER and is the answer not in the manual?
Questions and answers