Tektronix TDS 544A Technical Reference

Digitizing oscilloscopes

Hide thumbs Also See for TDS 544A:

Download this manual

Technical Reference

TDS 544A

Digitizing Oscilloscopes

Volume 3

070-8714-00

WARNING

The service Instructions are for use by

qualified personnel only. To avoid personal

injury, do not perform any servicing unless

you are qualified to do so. Refer to the

Safety Summary prior to performing

service.

Please check for change information at the

rear of this manual.

First Printing: July 1993.

Need help?

Do you have a question about the TDS 544A and is the answer not in the manual?

Page 1 Technical Reference TDS 544A Digitizing Oscilloscopes Volume 3 070-8714-00 WARNING The service Instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified to do so. Refer to the Safety Summary prior to performing service.
Page 2 Instrument Serial Numbers Each instrument manufactured by Tektronix has a serial number on a panel insert or tag, or stamped on the chassis. The first letter in the serial number designates the country of manufacture. The last five digits of the serial number are assigned sequentially and are unique to each instrument.
Page 3: Warranty
Tektronix, with shipping charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Tektronix service center is located.
Page 9: Safety Summary
Safety Summary Please take a moment to review these safety precautions. They are provided for your protection and to prevent damage to the digitizing oscilloscope. This safety information applies to all operators and service personnel. These two terms appear in manuals: Symbols and Terms statements identify conditions or practices that could result in damage to the equipment or other property.