Connecting Source Devices - Canton DIGITAL MOVIE DM 90 Manual

Connecting source devices

The Canton DM systems offer a variety of connection options for all
standard source devices, such as DVD players, video recorders,
satellite receivers, multimedia consoles (Playstation®, X-Box®, ...)
etc. To do so, the audio connections of your source devices are
connected to the corresponding terminals on the back of the
subwoofer (1) or the DM 90 (DVD to DVD, video recorder to VCR
etc. ...). Source devices with a digital output for Dolby Digital and
DTS Bitstreams should also be connected digitally to the DM system.
This guarantees full Dolby Digital and DTS sound quality.
The video signal connections are made directly between the
source devices and the image reproduction unit. The selection of
the image source to be reproduced is made directly in the
selection menu of the television (3).
A digital satellite receiver can be connected with the DM system via
an optical or coaxial digital input, as desired. To do so, the desired
input on the back of the active subwoofer or the DM 90 must be
selected per slide switch (OPT/COAX).
(3)
DVD-Player
SAT-Tuner
etc.
(2)
(2)
(1)
4 3
Terminal of the DM 1
and DM 2 subwoofers.
Terminal DM 90