Saving Presets; Changing Temperature Units; Changing Wind Speed Units; Changing Pressure Units - AMX I!-WEATHER Instruction Manual

Using i!-Weather

Saving Presets

After you have selected a location, it is retrieved immediately. To save it as a preset:
1. On the "Select Location" Page, select Save.
2. Select the preset location to save to.
The selected preset will now display the city, state / city, country.
If you select a previously used preset while save is flashing, it will be overwritten.

Changing Temperature Units

To change temperature units:
1. Navigate to the "i!-Weather Select Location" page.
2. Select Fahrenheit or Celsius.
Next time a weather refresh occurs the units will be updated.

Changing Wind Speed Units

To change wind speed units:
1. Navigate to the "i!-Weather Select Location" page.
2. Select MPH (Miles Per Hour), KPH (Kilometers Per Hour) or Knots.
Next time a weather refresh occurs the units will be updated.

Changing Pressure Units

To change pressure units:
1. Navigate to the "i!-Weather Select Location" page.
2. Select Inches of Mercury, Millimeters of Mercury (torr), or Millibars.
Next time a weather refresh occurs the units will be updated.

Auto Refresh Interval Select

To select an auto refresh interval:
1. Navigate to the "i!-Weather Select Location" Page. At the bottom-center of the page you will
find the "Automatic Refresh" options.
2. Select desired auto refresh time interval.
3. If Off is selected, the weather can only be refreshed manually.
Auto Refresh refreshes weather data for the current weather location.
6 i!-Weather