Saving A Project; Closing A Project - AMX G4 PANELBUILDER V1.1 Instruction Manual

Basic Operations

Saving A Project

To save a G4 PanelBuilder project file (*.PB4):
1. Select File > Save. If this is the first instance of a save for your project, the Save As dialog
window launches.
2. Type the File name in the field provided.
3. Locate the directory you would like to save within.
4. Place a check next to Package template with project file if you would like to include the .TPT
file with the .PB4 file. Doing this will allow you to open the G4 PanelBuilder file on other
machines running the application.
5. Click Save.
Select Save As if you would like to save your project under another name or different location.
1. Select File > Save As to launch the Save As dialog window.
2. Type the File name in the field provided.
3. Locate the directory you would like to save within.
4. Place a check next to Package template with project file if you would like to include the .TPT
file with the .PB4 file. Doing this will allow you to open the G4 PanelBuilder file on other
machines running the application.
5. Click Save.
When you generate a TPDesign4 project G4 PanelBuilder stores information to the
.PB4 file. As a result the file will indicate being "dirty" or changed. You will need to
save the .PB4 file.

Closing A Project

To exit an open project but leave G4 PanelBuilder running:
When you generate a TPDesign4 project G4 PanelBuilder stores information to the
.PB4 file. As a result the file will indicate being "dirty" or changed. You will need to
save the .PB4 file.
12
Select File > Close. If you have not already saved, the Close Project dialog window will
prompt you.
If the file save is current the file closes.
G4 PanelBuilder