G4 Panelpreview Overview; Supported Platforms - AMX G4 PANELPREVIEW V1.2 Instruction Manual

G4 PanelPreview Overview

Panel optional. Now you have the ability to preview fully functional G4 panel files, sans the panel.
G4 PanelPreview can be launched from within TPDesign4 or as a stand alone option for viewing
TP4 panel files.
With G4 PanelPreview it is possible to:
Upon launching G4 PanelPreview you will be prompted to select a TP4 file to load. Browse to and
select your desired file; however it is not necessary to have a file at this time and you can select
Cancel. G4 PanelPreview continues to launch without a TP4 file.

Supported Platforms

G4 PanelPreview operates on:
If you are installing on a Windows 2000 machine, you must have Administrator rights
to install and run all required System files.
Other PC requirements:
G4 PanelPreview
Open any version TPDesign4 panel file.
Simulate push and release of buttons, including multi-state and bar graph buttons via the
mouse and keyboard on your PC.
Simulate the actions of external panel buttons.
Simulate computer control and view dynamic images on computers equipped with
Ethernet connectivity.
Windows XP® Professional (SP 1 or greater, running on a Pentium 400 MHZ processor
(minimum requirement); 700 MHZ Pentium III or better preferred, with at least 256 MB
of installed memory).
Windows XP® Home (SP 1 or greater, running on a Pentium 400 MHZ processor
(minimum requirement); 700 MHZ Pentium III or better preferred, with at least 256 MB
of installed memory).
Windows 2000® (SP 4 or greater) Professional (running on a Pentium 400 MHZ
processor (minimum requirement); 700 MHZ Pentium III or better preferred, with at
least 256 MB of installed memory.
The video card must have a minimum of 8 MB of onboard Video RAM (16 MB of
onboard Video RAM preferred).
Windows-compatible CD-ROM drive.
Windows-compatible mouse (or other pointing device).
At least 250 MB of free disk space.
G4 PanelPreview Overview
1