iOttie Velox Series, P 02, P 44 Manual

Also See for Velox Series:

User manual (43 pages)

Also fits for
P 02
P 44

Table of Contents

Contents

1 Product Information
2 Installing the Magnetic Wireless Charging Mount
3 Documents / Resources
- 3.1 Download manual

iOttie Velox Series, P 02, P 44 Manual

Product Information

At a Glance

Overview

Device Compatibility

Velox products are designed for use with MagSafe Compatible iPhones and cases.

Compatible devices include iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max and the iPhone 12 Series.

Product Specifications

Item	Specification
Total Input	DC 9.0V-1.67A DC 5.0V-2.0A
Wireless Charger Output	7.5 W
Cable Length	4'
Mount Length	2.22'
Mount Width	2.61'
Mount Height	3.58'
Mount Weight	5 oz.

Car Charger Specifications

Input

Output

DC 12V ~ 24V

DC 5V ~ 3A

DC 9V ~ 2A

DC 12V ~ 1.5A

*iOttie is not liable for possible damages due to product misuse.

Installing the Magnetic Wireless Charging Mount

Attaching the Air Vent Mount

Simply push the Velox mount onto the blade of your vehicle's air vent. The silicon texture of the prongs will ensure that the mount does not fall off even when driving on rough roads.
Attaching the Air Vent Mount
*Mount is designed to be used only with FLAT air vent blades.

Connecting to Power

Plug the cable into your vehicle's 12V power socket by using the included adaptor. Alternatively, you may plug the cable into your vehicle's USB-C outlet.
Connecting to Power

*The Velox Magnetic Wireless Charger does not have an On/Off switch. Once the cable is plugged in and the vehicle is turned on, the mount will stay on.

Mounting your phone

Simply place your phone against the mount, and the magnets will hold it in place, charging will start automatically. You are now ready to start driving.