iOttie Easy One Touch 4 Manual

Getting Started

For optimal mounting, please follow the detailed instructions within this manual when using the Easy One Touch 4. iOttie is not liable for possible damages due to product misuse.

Specifications

Additional Information

Universal design, fits all smartphones and their cases.

Mount rotates 360° for optimal viewing angles.

At a Glance

Installation

Please Note: Remember to remove all CDs from CD Slot before using your iTap 2 Wireless CD Slot Mount to avoid possible damage to the product and your vehicle. iOttie is not liable for possible damages due to misuse.

1. Press mount head & cradle together, tighten Cradle Knob.
   
2. 1. Press CD slot mount & cradle together, tighten Cradle Knob.
   2. Pull Lever to lock mount in place.
      
3. Test to make sure the Mount is secure and insert Bracket if needed.
   

Adjusting the Mount

Cradle Knob: When mounting in landscape mode, loosen to rotate the Cradle. Tighten to lock in desired position.

Using the Easy One Touch Mechanism

The Easy One Touch lock and release mechanism makes it simple to mount & retrieve smartphones in seconds.

Mounting

1. Press the locking side arms in.
   
2. Press your device against the Easy One Touch trigger button. The mount's arms will automatically close on contact and hold the device during the driving journey.
   

Releasing

Press the locking side arms with one hand and retrieve the device.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download iOttie Easy One Touch 4 Manual