Installation Instructions Note: Avoid fully tightening screws during initial assembly in case of assembly errors. Tighten screws only after all parts have been property assembled. Please read this manual carefully before installation and keep it well for future reference. • Please avoid harsh, corrosive, and abrasive cleaners. •...
Page 4
Installation Instructions STEP 1 Tighten screws only after all parts have been property assembled. A =12X STEP 2 C =6X...
Page 5
Installation Instructions STEP 3 The tightness of Part.D can be used to adjust the table level. B =4X D =4X STEP 4 Please avoid harsh, corrosive, and abrasive cleaners. Keep the edge of the table dry to avoid product damage.
Need help?
Do you have a question about the NV103KH and is the answer not in the manual?
Questions and answers