Advanced Security - TP-Link TL-MR3040 User Manual

TL-MR3040
FTP ALG - Select Enable, to allow FTP servers to operate properly.
TFTP ALG - Select Enable, to allow TFTP servers to operate properly.
H323 ALG - Select Enable, to allow H323 services to operate properly.
RTSP ALG - Select Enable, to allow RTSP services to operate properly.
Click the Save button to save your settings.
4.9.2

Advanced Security

Choose menu "Security → Advanced Security", you can protect the Router from being
attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood in the screen as shown in Figure
4-45.
Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5
and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates
the time section of the packets statistics. The result of the statistics is used for analysis by
SYN Flood, UDP Flood and ICMP-Flood.
DoS Protection - Denial of Service protection. Check the Enable or Disable button to
enable or disable the DoS protection function. Only when it is enabled, will the flood filters
be enabled.
Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack
Filtering.
Portable 3G/3.75G Battery Powered Wireless N Router
Figure 4-45 Advanced Security
-65-