Cisco 7606-S Installation Manual page 123

Chapter 5 Removal and Replacement Procedures
Figure 5-124 Placing the Foam Filter Over the Filter Retainer
1
1 Filter cage assembly
3 Filter retainer
5
Thumb loops
Install filter assembly with tabs facing the floor as follows:
Step 6
Fit tabs (see
a.
Figure
Rotate the filter assembly towards the intake panel (see
b.
Tighten two fastening screws.
c.
OL-4503-24
Installing the Air Filter Assembly on a Cisco 7609 Router and the Cisco 7609-S Router (Optional)
3
2
4
Figure 5-124) on bottom of filter cage assembly into lower support loops (see
5-122).
5
2 Filter
4 Tabs (on rear of filter cage assembly)
Figure 5-125).
Cisco 7600 Series Router Installation Guide
5-123