Download Print this page

S.R.Smith 66-209-588S2 Manual

1/2 meter frontier ii jump stand w/ jig

Advertisement

Quick Links

1/2 METER FRONTIER II JUMP STAND W/ JIG
**PROFESSIONAL INSTALLATION RECOMMENDED. IMPROPER INSTALLATION VOIDS S.R. SMITH'S LIMITED PRODUCT WARRANTY**
SRS AUSTRALIA, PTY LTD
12 Enterprise St
Richlands QLD 4077
Australia
Phone 07 3812 2283 • Fax 07 3812 1187
www.srsmith.com/au
SEE REVERSE SIDE FOR INSTALLATION DIAGRAM AND INSTRUCTIONS.
06-305-1
Steel Stand Complete
ASSEMBLY AND INSTALLATION INSTRUCTIONS
–PLEASE READ CAREFULLY–
POOL
WATER
ENVELOPE
ANSI/APSP/ICC-5 2011 STANDARDS FOR THIS BOARD/STAND. USE ONLY WITH
A COMPATIBLE S.R. SMITH DIVING BOARD/STAND. S.R. SMITH DIVING
BOARDS AND RELATED EQUIPMENT ARE FOR IN-GROUND POOLS ONLY. DO
NOT USE WITH OTHER POOLS, DOCKS, ETC.
USE WITH AN IMPROPERLY-SIZED POOL, INCOMPATIBLE STAND, OR
IMPROPER INSTALLATION MAY RESULT IN DEATH OR SERIOUS INJURY.
ATTENTION: THESE INSTRUCTIONS MUST REMAIN WITH PLATFORM OWNER
REGISTER YOUR S.R. SMITH PRODUCT AT
www.srsmith.com/en/customer-service/product-registration
Visit srsmith.com for information on the complete
line of S.R.Smith pool products.
DIMENSIONS
MUST
MEET
OR
EXCEED
S.R. SMITH, LLC
CORPORATE HEADQUARTERS
P.O. Box 400 • 1017 S.W. Berg Parkway
Canby, Oregon 97013
Phone (503) 266 2231 • Fax (503) 266 4334
www.srsmith.com
USA
MAR16

Advertisement

loading
Need help?

Need help?

Do you have a question about the 66-209-588S2 and is the answer not in the manual?

Questions and answers

Summary of Contents for S.R.Smith 66-209-588S2

  • Page 1 Visit srsmith.com for information on the complete Australia Phone 07 3812 2283 • Fax 07 3812 1187 Phone (503) 266 2231 • Fax (503) 266 4334 line of S.R.Smith pool products. www.srsmith.com/au www.srsmith.com SEE REVERSE SIDE FOR INSTALLATION DIAGRAM AND INSTRUCTIONS.
  • Page 2 1/2 METER FRONTIER II JUMP STAND INSTALLATION INSTRUCTIONS FOR 6’ AND 8’ FRONTIER II JUMP BOARDS BE SURE CONCRETE DECK SURROUNDING ANCHOR JIG COMPLIES WITH MINIMUM DIMENSIONS AS SHOWN IN FIGURE A. FIGURE A Verify that the pool water envelope dimensions meet or exceed ANSI/APSP/ICC-5 2011 standards for this board and stand.