Advertisement
TM
VISTA
MOVEABLE
LIFEGUARD CHAIR
Rainbow Pool Products
CORPORATE HEADQUARTERS
WESTERN SALES AND MANUFACTURING PLANT
PO Box 2388, Mansfield Qld 4122
P.O. Box 400
1017 SW Berg Parkway
Telephone STD 61-7-3849 5385
Canby, Oregon 97013
Facsimile STD 61-7-3849 5384
(503) 266-2231
Fax (503) 266-4334
Email: info@rainbowpoolproducts.com.au
www.srsmith.com
Web: www.rainbowpoolproducts.com.au
06-649
S.R. SMITH, LLC 2004
SEP 05
Advertisement
Table of Contents
Related Manuals for S.R.Smith VISTA US48500
Summary of Contents for S.R.Smith VISTA US48500
- Page 1 VISTA MOVEABLE LIFEGUARD CHAIR Rainbow Pool Products CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT PO Box 2388, Mansfield Qld 4122 P.O. Box 400 1017 SW Berg Parkway Telephone STD 61-7-3849 5385 Canby, Oregon 97013 Facsimile STD 61-7-3849 5384 (503) 266-2231 Fax (503) 266-4334 Email: info@rainbowpoolproducts.com.au www.srsmith.com...
- Page 2 INTRODUCTION The Vista Moveable Guard Chairs are designed for use on commercial pools where more than one location is desired for one chair. Proper and complete assembly, use, and maintenance are essential for proper operation and to reduce the risk of accident or injury.
- Page 3 50.00 VISTA 8’ 52.44 30.00 US48550 42.00 5.00 20.02 Ø1.90 111.75 100.54 95.98 77.31 10.43 (TYP) 23.20 11.74 63.91 FIGURE 2...
- Page 4 VISTA PARTS LIST ITEM NO. QTY. PART NO. DESCRIPTION 8-609 LIFEGUARD SEAT 2407030 SWIVEL, LIFEGUARD CHAIR 8-612 FOOTBOARD, 30" X 42" 8-510 GASKET, 7-1/2" X 7-1/2" 13-117 SWIVEL STAND, W/O UMBRELLA HOLDER 20-202 SWIVEL STAND MOUNTING PLATE FC-100C 10" FULCRUM COVER W/ SLOT 20-116 UMBRELLA HOLDER ASSEMBLY 18 05-14-114 FLAT WASHER, 1/2", SS...
- Page 5 ASSEMBLY INSTRUCTIONS 1. Begin by locating the rear frame, front cross tubes (2), and the split tees as shown in FIGURE 3. Attach front cross tubes to the rear frame by sliding over the inserts as shown in FIGURE 3. (Do not bolt cross tubes in at this time) Attach (4) split tee halves at the top of the rear frame using (4) 3/8”x2-1/2”...
- Page 6 Place Swivel onto Swivel Stand W/O Umbrella Holder orienting as shown in FIGURE 6. Place Screw through Swivel and Swivel Stand (4 places) as shown in FIGURE 6. Place ¼” Lock Washer and ¼” Hex Nut onto Screw and tighten (4 places). FIGURE 6 Attach the seat assembly to the footboard using (4) 1/2"x3”...
- Page 7 7. Install the 6” wheels using (1) 1/2"x5-1/2” hex head bolt, (2) 1/2" flat washers, and (1) 1/2" lock washer and (1) ½” hex nut as shown in FIGURE 9. 8. Attach the front rubber protective pads and fully tighten all hardware. See FIGURE 9.
Need help?
Do you have a question about the VISTA US48500 and is the answer not in the manual?
Questions and answers