Table of Contents
Related Manuals for Gast LAA
Summarization of Contents
Installation
Mounting
Proper mounting ensures stability and reduces vibration for the pump.
Plumbing
Connect intake and exhaust ports with correct pipe size for performance.
Accessories
External intake and exhaust mufflers require periodic checks and filter replacement.
Motor Control
Ensure qualified electrician for electrical installation and proper motor overload settings.
Electrical Connection
Model with a power supply cord:
Grounding plug must connect to a matching grounded outlet; avoid adapters.
Model that is permanently wired:
Connect to a grounded, permanent wiring system per safety codes.
Extension cords:
Use 3-wire cords of correct gauge for length to prevent hazards.
Operation
Start Up
Check voltage, direction, and thermal protection if motor fails to start or slows.
Service Kit Installation
Re-Assembly
Steps for reassembling the pump after using a service kit, including torque values.
Need help?
Do you have a question about the LAA and is the answer not in the manual?
Questions and answers