Related Manuals for KOINOR Epos 3
Summarization of Contents
Frame Mounting Preparation
Unpacking and Initial Setup
Details the initial unpacking of the frame and essential setup precautions to prevent damage.
Checking Component Delivery and Markings
Ensures correct delivery of frame and plateau components and verifies color-coded alignment markings.
Frame Assembly: Initial Steps
Unscrewing and Cable Routing
Instructions for unscrewing pre-inserted screws and routing connector cables for safety.
Centering the Frame
Guidance on properly centering the metal frame within the plateau for correct assembly.
Frame Assembly: Cable Management and Tools
Cable Ducting and Color Markings
Guidance on placing cables in ducts and noting color-coded markings for proper assembly.
Using Assembly Tools and Tightening Screws
Locating the assembly tool and important advice on hand-tightening screws during frame assembly.
Electrical Connections: Drive Unit
Connecting Drive Unit Cables
Step-by-step instructions for connecting the cables for the drive unit, including cable locks and ducting.
Electrical Connections: Seat Unit
Connecting Seat Unit Cables
Detailed steps for connecting the cables for the seat unit, ensuring proper connection and security.
Final Plateau Handling
Safe Plateau Rotation Procedure
Instructions on how to safely rotate the assembled plateau to avoid damage to the unit or flooring.
Seat Assembly for Add-On Corners
Plateau Preparation for Add-On Corners
Preparing the plateau, including leg assembly and correct orientation, before attaching seat units.
Positioning and Aligning Seat Units
Lifting and positioning the seat unit correctly onto the plateau, aligning mounting sleeves with bolts.
Ensuring Proper Seat Alignment
Checking the seat's resting position and ensuring mounting sleeve holes are parallel to bolt holes.
Securing Add-On Seat Units
Fastening Seat Units to Plateau
Using the assembly key to screw mounting sleeves and bolts together, ensuring correct screw head orientation.
Seat Assembly for Loungers and Recliners
Plateau Preparation for Lounger/Recliner
Steps for preparing the plateau and placing foam sheets to prevent surface damage before seat assembly.
Connecting Cables and Securing Seat
Connecting LS cables, lifting the seat unit over the cone, and securing it with final engagement.
Final Seat Mounting Checks
Ensuring cables are not pinched and the recliner element is positioned correctly.
Disassembly Instructions
Preparation for Sofa Disassembly
Steps for preparing the sofa for disassembly, including placing protective blankets and identifying the dismantling aid.
Detaching the Seat Unit
Procedure for loosening the seat from the spindle, disconnecting cables, and lifting the seat unit.
Final Disassembly Steps
Instructions for turning the plateau and dismantling the feet or runners after seat removal.
Need help?
Do you have a question about the Epos 3 and is the answer not in the manual?
Questions and answers