Advertisement
Quick Links
REQUIRED FOR INSTALLATION
Door support
Light
Vacuum cleaner
3
#2
mm
3mm
No. 2
hex key
phillips bit
G U I L L O T I N E F I R E S C R E E N
INSTALLATION MANUAL
Keep these instructions for future reference
FOR MAINTENANCE
Cardboard and
Impact driver
masking tape
8
2.5mm
mm
8mm ratchet
2.5mm
spanner wrench
hex bit
4
mm
4mm
hex key
S T Û V 2 1
Covered
Protective cloth
workplace
7
5
mm
mm
5mm
7mm
hex bit
hex socket
!
IMPORTANT
This document is an additional manual to the
Stûv 21 installation manual. For a successful
installation, it is important to follow these
instructions carefully.
Look for this symbol in the
Stûv 21 installation manual
to know when to refer to this
additional manual.
EN
Advertisement
Related Manuals for Stuv 21-105
Summarization of Contents
DIMENSIONS
DIMENSIONS AND PART NUMBERS
Details the dimensions and part numbers of the firescreen models.
INSTALLATION
UNPACKING
Instructions for unpacking the firescreen and checking contents.
INSTALLING WHILE INSTALLING THE FIREPLACE
Step-by-step guide for installing the firescreen during fireplace installation.
INSTALLING AFTER FIREPLACE INSTALLATION
Guide for installing the firescreen when the fireplace is already installed.
USE
THREE HEIGHTS
Details the three predefined heights or modes for firescreen operation.
MAINTENANCE
REMOVING THE DOOR
Instructions on how to safely remove the firescreen door.
REMOVING THE FIRESCREEN
Step-by-step guide for detaching the entire firescreen.
REPLACING COMPONENTS
Procedures for replacing various components of the firescreen.
REASSEMBLY
Steps to reassemble the firescreen after maintenance or component replacement.
Need help?
Do you have a question about the 21-105 and is the answer not in the manual?
Questions and answers