Related Manuals for Fox ESS R100
Summarization of Contents
1. Notes on This Manual
1.1 Scope of Validity
Defines the models covered by the manual and the scope of its content.
1.2 Target Group
Identifies qualified electricians as the intended audience for this manual.
1.3 Symbols Used
Explains symbols displayed on the inverter and its type label.
1.4 Symbols Explanation
Provides explanations for various safety and compliance symbols.
2. Safety Precautions
2.1 Unpacking and Inspection
Instructions for checking the product upon receipt for damage and accuracy.
2.2 Package Safety
Safety guidelines related to handling and installation of the product packaging.
2.3 Electrical Connection Safety
Critical safety measures for electrical connections to prevent shocks and damage.
2.4 Operation Safety
Guidelines for safe operation of the inverter, including handling of components.
2.5 Maintenance Safety
Safety precautions to prevent injury or damage during maintenance activities.
2.6 Disposal Safety
Procedures for safely disposing of the product according to regulations.
3. Introduction
3.1 Product Introduction
Overview of the R series three-phase non-isolated grid-tied inverters.
3.2 Basic Features
Details the advantages and features of the high-performance R series inverters.
3.3 Size
Provides dimensional specifications for the inverter unit.
3.4 LED Indicator Panel
Describes the function and status indicated by the LED indicators on the inverter.
3.5 Terminals of Inverter
Identifies and explains the purpose of each terminal on the inverter.
3.6 Circuit Diagram
Illustrates the main circuit configuration of the inverter and component functions.
4. Technical Parameters
4.1 DC Input/AC Output for R Series
Lists detailed DC input and AC output specifications for R series models.
4.2 Efficiency, Protection, and Safety
Details the inverter's efficiency ratings and built-in protection features.
4.3 General Data
Provides general specifications like dimensions, weight, operating conditions, and certifications.
5. Installation
5.1 Installation Safety
Crucial safety guidelines to follow during the installation process.
5.2 Check for Physical Damage
Procedure for inspecting the inverter for any damage incurred during transport.
5.3 Packing List
Lists the components included in the inverter package.
5.4 Mounting
Covers mounting requirements including environment, space, angle, and detailed installation steps.
6. Electrical Connection
6.1 Safety Precautions
Essential safety measures before and during electrical connection procedures.
6.2 Electrical Connection Overview
Provides a general overview of connecting the inverter to the PV system and grid.
6.3 Secondary Ground Connection
Detailed instructions for establishing a reliable secondary ground connection.
6.4 AC Wiring
Guidelines and requirements for connecting the inverter's AC output.
6.4.1 AC Wiring Requirements
Specifies requirements for AC circuit breakers and cable sizing.
6.4.2 Wiring Steps
Step-by-step guide for performing the AC wiring connections.
6.4.3 Aluminum Cable Requirements
Guidance on using aluminum cables for AC connections.
6.5 DC Connection
Instructions for connecting the DC input from PV modules to the inverter.
6.5.1 PV Input Configuration
Details on configuring PV strings for optimal DC input.
6.5.2 Assembling DC Connectors
Steps for correctly assembling and connecting DC connectors.
6.5.3 DC Wiring
Specific procedures for DC wiring using MC4 connectors.
6.6 Communication Device Installation
Steps for installing communication devices and setting up monitoring.
6.6.1 Communication Connector Wiring Steps
Detailed steps for wiring communication connectors to the inverter.
6.6.2 Wire Sequence of the Rubber Core
Diagram showing the pinout and wire sequence for the communication connector.
6.6.3 Ripple Control (Optional)
Information on using ripple control for dynamic power limitation.
6.6.4 Monitoring Module (Optional)
Procedure for plugging in and setting up the monitoring module.
6.6.5 Communication Connector Application Method
Methods for connecting communication devices to the inverter and smart logger.
7. Commissioning
7.1 Inspection before Commissioning
Checklist of items to verify before starting the inverter's commissioning.
7.2 Inverter Start-Up
Step-by-step guide for safely starting up the inverter after installation.
7.3 Inverter Switch Off
Procedure for safely shutting down the inverter.
7.4 Fox Cloud APP
Information on using the Fox Cloud App for monitoring and maintenance.
8. Maintenance
8.1 Maintenance Safety
Critical safety warnings and precautions for performing maintenance.
8.2 Alarm List
A comprehensive list of potential alarms, their codes, statements, and solutions.
8.3 Troubleshooting
Guidance on diagnosing and resolving common inverter issues.
8.4 Routine Maintenance
Scheduled maintenance checks and procedures for ongoing upkeep.
9. Decommissioning
9.1 Dismantling the Inverter
Steps for safely disconnecting and removing the inverter from its installation.
9.2 Packaging
Guidelines for repackaging the inverter for storage or transport.
9.3 Storage and Transportation
Recommendations for storing and transporting the inverter safely.
Need help?
Do you have a question about the R100 and is the answer not in the manual?
Questions and answers