Related Manuals for Fox ESS H3-5.0-Smart
Summarization of Contents
Notes on This Manual
Scope of Validity
Defines the scope of the manual and applicable product models.
Target Group
Identifies the intended audience for this manual.
Symbols Used
Explains safety symbols and general information icons used in the document.
Safety
Appropriate Usage
Guidelines for the correct and safe installation and operation of the inverter.
PE Connection and Leakage Current
Details on protective earth connection and factors affecting leakage current.
Introduction
Basic Features
Highlights the key features and advantages of the H3/AC3 Smart series inverters.
Dimensions
Provides physical dimensions of the inverter unit.
Terminals of inverter
Identifies and describes the different terminals on the inverter.
Technical Data
PV Input
Specifications for the PV input parameters for H3 Smart models.
Battery
Technical specifications related to battery compatibility and performance.
AC Output/Input
Details on the AC output and input specifications of the inverter.
EPS Output
Technical specifications for the Emergency Power Supply (EPS) output.
Efficiency and Protection
Information on inverter efficiency ratings and built-in protection features.
General Data
Provides general specifications including dimensions, weight, and environmental limits.
Installation
Check for Physical Damage
Procedure to inspect the inverter for any damage incurred during transportation.
Packing List
Lists all the accessories and components included in the inverter package.
Mounting
Instructions and precautions for physically mounting the inverter.
Electrical Connection
PV Connection
Detailed steps and safety precautions for connecting PV strings to the inverter.
Battery Connection
Instructions and safety warnings for connecting the battery to the inverter.
Grid Connection
Procedure for connecting the inverter to the public grid, including wiring requirements.
Earth Connection
Steps for properly grounding the inverter unit.
Installation Instructions
General guidelines for installing wiring and connectors.
Installation steps for 5-core wire
Detailed procedure for connecting 5-core wires to the inverter.
RJ45 connection
Wiring instructions for RJ45 ports (Meter, Ethernet, DRM).
Antenna Connection
Instructions for connecting the antenna to the inverter.
COM connection
Overview of COM ports and their functions (EMS485, Meter485, etc.).
Communication Device Installation
Guide to installing optional communication devices like WiFi, GPRS, LAN.
EPS Connection
Instructions for connecting the inverter to the EPS for backup power.
System Connection Diagrams
Visual representations of various system connection configurations.
Main function implementation
DRM wiring
Configuration and wiring for Demand Response Modes (DRM).
RCR wiring
Wiring and setting for Ripple Control (RCR) function.
SG ready wiring and setting
Instructions for wiring and configuring the Smart Grid Ready function.
Reactive Function Setting
Guide to configuring reactive power control modes and settings.
Firmware Upgrading
Firmware Upgrade Procedure
Detailed steps for upgrading the inverter's firmware using a U-disk.
Operation
Control Panel
Description of the inverter's control panel buttons and LCD screen.
Function Tree
Overview of the inverter's menu structure and available functions.
Maintenance
Alarm List
List of fault codes and their corresponding solutions for troubleshooting.
Troubleshooting and Routine Maintenance
Guide to diagnosing issues and performing regular maintenance checks.
Decommissioning
Dismantling the Inverter
Steps for safely disconnecting and removing the inverter.
Packaging
Guidelines for packing the inverter for transport or storage.
Storage and Transportation
Recommendations for storing and transporting the inverter safely.
Need help?
Do you have a question about the H3-5.0-Smart and is the answer not in the manual?
Questions and answers