Operation; Starting Cold Engine - Echo SRM-260 - 12-00 Operator's Manual

24
O
PERATION
• Provide all operators of this equipment with the Operator's Manual,
and instructions for safe operation.
• Refer to the Safety Manual provided with the unit for proper
trimming and brush cutting techniques.
• During operation, the bearing housing, and the muffler or catalytic
muffler cover area may become very hot. Avoid contact during and
immediately after operation. Always keep exhaust area clear of
flammable debris. Allow the engine and muffler to completely cool
before performing any maintenance activity.

STARTING COLD ENGINE

WARNING
The cutting attachment should not rotate at idle. If attachment
rotates, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1. Stop Switch - Start/Run.
Move stop switch button (A) forward away from the STOP
position.
2. Close Choke - Cold Start.
Move choke lever (B) to Cold Start Position.
DANGER
A
B