Related Manuals for Suzuki DF350AMD
Summarization of Contents
Important Safety Information
Signal Word Explanations
Explains the meanings of WARNING, CAUTION, NOTICE, and NOTE signal words.
Owner's Safety Notice
Provides critical safety advice for outboard motor owners.
Fuel and Oil
Fuel Type and Octane Requirements
Details recommended gasoline types and octane ratings for specific models.
Gasoline/Ethanol Blend Usage
Discusses the use of ethanol blended fuels and associated precautions.
Engine Oil and Gear Oil
Engine Oil Specifications and Recommendations
Specifies recommended engine oil types, viscosity grades, and quality.
Gear Oil Specifications and Recommendations
Details the recommended type and specification for gear oil.
Location of Parts and Labels
Safety Symbol and Label Explanation
Explains the meaning and location of various safety labels and symbols.
External Parts Diagram (DF300B/325A/350A)
Diagrams illustrating the location of external parts for specific models.
External Parts Diagram (DF300BMD/350AMD)
Diagrams illustrating the location of external parts for specific models.
Motor Mounting and Battery Installation
Motor Mounting and Installation Guidelines
Recommends professional installation and warns against overpowering.
Battery Requirements and Specifications
Details required battery types, capacity, and voltage specifications.
Battery Connection and Safety Precautions
Explains battery connection procedures and essential safety warnings.
Keyless Start System and Propellers
Keyless Start System Functionality
Explains how the keyless start system operates and its components.
Keyless FOB Operation and Safety Warnings
Describes keyless fob functions and associated radio wave safety warnings.
Keyless FOB Battery Replacement Guide
Step-by-step instructions for replacing the keyless fob battery.
Propeller Selection Guide
Guidance on selecting the correct propeller matched to the boat.
Propeller Installation Steps
Detailed procedure for installing the outboard motor propeller.
Propeller Removal Steps
Detailed procedure for removing the outboard motor propeller.
Adjustment and Gauge Operation
Trim Angle Adjustment and Its Effects
Explains trim angle adjustment and its impact on stability and performance.
Multi-Function Gauge Button Functions
Explains the function of each button on the multi-function gauge.
Gauge Screen Selection and Options
How to select and configure display screens on the multi-function gauge.
Gauge Sub Information Display Options
Describes how to view and cycle through sub-information on the gauge.
Gauge Menu and Settings
Gauge Illumination Settings
Adjusting gauge brightness, day/night mode, and sync settings.
Gauge Diagnosis and Data Output
Accessing diagnostic codes and outputting operational data.
Gauge Device List and Keyless Settings
Managing connected devices and configuring keyless system settings.
Initial Settings Configuration
Initial Setting: Language and Units
Setting the display language and measurement units for the gauge.
Initial Setting: Time and Position
Configuring time display format and positional settings.
Alarm and Caution Systems
Alarm and Caution System Overview
General explanation of the motor's alert and caution systems.
Engine-Specific Caution System Details
Details on over-revolution, oil pressure, and other engine cautions.
Overheat and Thermostat Alert Systems
Explains overheating warnings and thermostat alert system.
Electronic Control System Cautions
Cautions related to electronic throttle, shift, and control unit communication.
Keyless System and Diagnostic Cautions
Keyless FOB and Battery Caution Systems
Alerts for keyless fob identification errors and low battery voltage.
Keyless Control Unit and Diagnostic Systems
Cautions for keyless unit battery and engine diagnostic system alerts.
System Reminders and Alerts
Oil Change Reminder System: Activation and Cancellation
How the oil change reminder activates and how to cancel it.
Engine Stalling and Water in Fuel Alerts
Alerts for engine stalling and presence of water in fuel.
Tilting and Manual Operation
Power Trim and Tilt Operation Guide
Instructions on how to operate the power trim and tilt system.
Tilt Limiter Cam Adjustment (DF300B/325A/350A)
Adjusting the tilt limiter cam for specific models.
Tilt Upper Limit Position Setting (DF300BMD/350AMD)
Setting the tilt upper limit position for specific models.
Manual Tilting Procedure
Steps for manually tilting the outboard motor.
Tilt Lock Lever Usage
Explains the function and usage of the tilt lock lever.
Pre-Boating Checks and Break-in
Pre-Boating Inspection Checklist
Essential checks to perform before operating the boat.
Engine Break-in Procedures
Guidelines for the proper break-in period of the new engine.
Engine Operation and Controls
Engine Start and Stop Procedures
How to start and stop the engine using keyless or ignition systems.
Remote Control Box: Throttle Only Switch
Explains the function and usage of the throttle-only switch.
Remote Control Box: Station Select Switch
How to select between different driving stations on the boat.
Remote Control Box: 1 Lever Switch
Operation of the 1-lever switch for controlling multiple engines.
Engine Starting Procedure
Step-by-step guide for starting the outboard motor.
Emergency Start: Without Keyless FOB
Procedure for starting the engine if the keyless fob is unavailable.
Shifting and Speed Control
How to shift gears and control the engine speed.
Engine Shut-Off Procedures
Instructions on how to properly stop the engine.
Special Operating Conditions
Shallow Water Operation: Motor Tilting
Adjusting motor tilt for operation in shallow water.
Troll Mode: Switching and Setting
How to switch to and set the troll mode for low-speed operation.
Troll Mode: Adjusting and Cancelling Speed
How to adjust trolling speed and cancel the troll mode.
Salt Water Operation: Flushing Water Passages
Procedures for flushing water passages after operating in salt water.
Motor Handling and Trailering
Motor Removal and Transporting Guidelines
Procedures for safely removing and transporting the outboard motor.
Trailering Safety Guidelines
Recommendations for safely trailering the boat with the motor attached.
Inspection and Maintenance Schedule
Maintenance Schedule and Intervals
Chart detailing recommended maintenance tasks and their intervals.
Spark Plug and Fuel Line Service
Spark Plug Inspection and Replacement
Guide for inspecting, gapping, and replacing spark plugs.
Breather and Fuel Line Inspection
Instructions for inspecting breather and fuel lines for damage or leaks.
Fluid Service Procedures
Engine Oil Change Procedure
Step-by-step instructions for changing the engine oil.
Gear Oil Check and Change Procedure
Procedures for checking and changing the gear oil.
Low Pressure Fuel Filter Replacement
Instructions for periodic replacement of the low pressure fuel filter.
Lubrication and Protection Systems
Lubrication Points and Lubricants
Chart showing lubrication points and recommended lubricants for motor parts.
Anode Inspection and Maintenance
Guidance on inspecting and maintaining anodes for corrosion protection.
Bonding Wire Inspection
Checking bonding wires for damage to ensure proper grounding.
Propeller Hardware Inspection
Inspection of propeller nut, pin, and front propeller nut stopper.
Battery Maintenance: Solution Level
Maintaining the battery solution level and checking for damage.
Engine Oil Filter Replacement
Schedule and procedure for replacing the engine oil filter.
Water Passage Flushing and Submerged Motor
Water Passage Flushing Procedures
Methods for flushing cooling system water passages after use.
Submerged Motor Handling Procedures
Steps to take for a motor that has been accidentally submerged in water.
Storage and Post-Storage Procedures
Motor Storage Preparation Steps
Procedures for preparing the motor for long-term storage.
Post-Storage Motor Return Procedure
Steps to return the motor to operating condition after storage.
Battery Storage Guidelines
Recommendations for storing the outboard motor's battery.
Troubleshooting and Fuse Service
Troubleshooting: Starting and Stalling
Common issues and solutions for engine starting and stalling problems.
Troubleshooting: Cautions and Shifting
Diagnosing caution system activations and shifting operation issues.
Troubleshooting: Propeller and Engine Speed
Solutions for problems related to propeller and engine speed.
Fuse Box and Fuse Replacement
Guide to locating and replacing fuses in the fuse box.
Specifications and Directives
Model-Specific Technical Specifications
Detailed technical specifications for different outboard motor models.
EC Directive: Sound Pressure Level
Information regarding European Community sound pressure level directive.
Oil Change Reminder System Flowchart
Visual flowchart illustrating the oil change reminder system logic.
Need help?
Do you have a question about the DF350AMD and is the answer not in the manual?
Questions and answers