Table of Contents
Advertisement
Quick Links
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Type I Camera
Type II Camera
Type III Camera
Type IV Camera
Type V Camera
This manual may contain several technical mistakes or
printing errors, and the content is subject to change
without notice. The updates will be added to the new
version of this manual. We will readily improve or update
the products or procedures described in the manual.
Bullet & Turret Camera
Type
Smart Hybrid Light
User Manual
Model
DS-2CE16U0T-LPF
DS-2CE16U0T-LF
DS-2CE17U0T-LF
DS-2CE76U0T-LPF
DS-2CE78U0T-LF
DS-2CE76U0T-LMF
01000020230816
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-2CE16U0T-LF
Summary of Contents for HIKVISION DS-2CE16U0T-LF
- Page 1 Thank you for purchasing our product. If there are any questions, or requests, do not hesitate to contact the dealer. This manual applies to the models below: Type Model DS-2CE16U0T-LPF Type I Camera DS-2CE16U0T-LF Type II Camera DS-2CE17U0T-LF Type III Camera...
- Page 2 DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET...
-
Page 3: Regulatory Information
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS. Regulatory Information EU Compliance Statement This product and - if applicable - the supplied accessories too are marked with "CE"... - Page 4 Warnings Follow Cautions Follow these these safeguards to precautions to prevent prevent serious injury potential injury or or death. material damage. Warnings In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
-
Page 5: Product Features
Keep the camera away from liquid while in use for non- water-proof device. While in delivery, the camera shall be packed in its original packing, or packing of the same texture. The beam of the light at the distance of 200 mm is ... -
Page 6: Installation
1.2.3 Overview of Type III Camera Installation Plate Base Enclosure Switch Button Power Cord Main Body Video Cable Figure 1-3 Overview of Type III Camera Note: Press and hold the switch button for 5 seconds to switch the video output. Four kinds of video outputs are available: TVI, AHD, CVI, and CVBS. - Page 7 disassemble the camera for repair or maintenance by yourself. Installation of Type I & II Camera 2.1.1 Ceiling/Wall Mounting without Junction Box Steps: 1. Paste the drill template (supplied) to the installation location. 2. (Optional) For cement ceiling, drill the screw holes with a 5.5 mm drill and insert the supplied wall plugs.
- Page 8 Figure 2-4 Secure the Junction Box on the Wall 7. Route the cables through the bottom cable hole or side cable hole of the junction box and connect the cables. 8. Fix the junction box cover on its body with three PM3 ×...
- Page 9 Figure 2-7 Dissemble the Camera iii. Secure the base to the ceiling with three PA4 × 25 screws (supplied). iv. Align the screw hole with the triangle mark to install the camera back to the base and secure it. Triangle Mark Figure 2-8 Install the Camera to Ceiling 4.
- Page 10 Figure 2-11 Fix the Junction Box Cover and Junction Box Body For Type III and Type V camera: PA4 × 25 PM3 × 13 Junction Box Cover PM4/M4 × 10 Installation Plate/Base Figure 2-12 Fix the Camera to the Junction Box 7.
-
Page 11: Menu Description
For Type V camera: i. Refer to Step 3 of Section 2.2.1 to dissemble the camera. ii. Use M4 × 10 screws to fix the base onto the wall mount. Figure 2-15 Fix the Base 4. Refer to steps 3 to 5 of Section 2.2.1 Ceiling Mounting without Junction Box to finish installation. -
Page 12: Video Format
VIDEO FORMAT EXPOSURE MODE ANTI-BANDING EXPOSURE BACK EXIT SAVE & EXIT LIGHTING MODE IR/WHITE LIGHT SMART IR THRESHOLD LIGHTING SETTINGS LEVEL BACK EXIT SAVE & EXIT IMAGE MODE WHITE BALANCE BRIGHTNESS CONTRAST VIDEO SHARPNESS MAIN MENU SETTINGS SATURATION BACK EXIT SAVE &... -
Page 13: White Light
3.2 EXPOSURE EXPOSURE MODE You can set the EXPOSURE MODE to GLOBAL, BLC, HLC, or DWDR. GLOBAL GLOBAL refers to the normal exposure mode which adjusts lighting distribution, variations, and non-standard processing. BLC (Backlight Compensation) BLC (Backlight Compensation) compensates light to the object in the front to make it clear, but this may cause over-exposure of the background where the light is strong. -
Page 14: Video Settings
THRESHOLD The higher the threshold is, the more sensitive the device is to dark environment. LEVEL You can adjust the maximum brightness of supplement light. 3.4 VIDEO SETTINGS Move the cursor to VIDEO SETTINGS and click Iris+ to enter the submenu. IMAGE MODE, WHITE BALANCE, BRIGHTNESS, CONTRAST, SHARPNESS, SATURATION, and DNR are adjustable. -
Page 15: Factory Default
SATURATION Saturation is the proportion of pure chromatic color in the total color sensation. Adjust this feature to change the saturation of the color. DNR refers to digital noise reduction. This function reduces noise in video stream. 3.5 FACTORY DEFAULT Reset all the settings except video format to factory defaults.
Need help?
Do you have a question about the DS-2CE16U0T-LF and is the answer not in the manual?
Questions and answers