Technical Specifications - VINCENT SP-331 Instructions For Use Manual

Symptom
Poor sound quality
Humming low fre-
quency noise is
audible, even as
no audio source is
playing back
Frequency response:
Nominal Output Power per channel at 8Ω:
Nominal Output Power per channel at 4Ω:
Input sensitivity:
Total Harmonic Distortion:
Signal to Noise Ratio:
Input Impedance:
AC power connection type:
Inputs:
Outputs:
Dimensions (W x H x D):
Weight:
Colour:
Tubes:
Vincent
30
SEARCH FOR ERRORS
Possible Cause
The cable connections are not tight, the con-
nectors are dirty or a cable is defective.
A record player has been connected to a line
level input of the preamplifier without using a
phono preamplifier.
An audio source with standard line level out-
put (example: CD player) is connected to the
power amplifier direct input "INPUT" (4).
See section "Net frequency noise"
in the chapter "Tips".

TECHNICAL SPECIFICATIONS

Countermeasure
Check the cables and cable connections.
Interconnect a phono preamplifier.
Do not connect line level audio sources at the
input.
See section "Net frequency noise"
in the chapter "Tips".
10 Hz - 20 kHz ±0.5 dB
150 W
300 W
1.2 V
< 0.1% (1 kHz, 1 W)
> 90 dB
47 kΩ
220V – 240V/50 Hz
1x RCA main input stereo
2 x 2 loudspeaker clamps
for up to 4 loudspeakers
430 x 160 x 450 mm
6.5 kg
silver / black
2x 6N16