Connecting The Preamplifier - VINCENT SP-331 Instructions For Use Manual

This main amplifier is equipped with a stereo audio input ("INPUT") on which the unit awaits the preampli-
fied signal of two audio channels. This is the audio information that the SP-331 provides for one or two pairs
of loudspeakers.
Attention:
No source with a standard line level signal ("LINE OUT") must be connected to this input. It is only
intended for preamplified signals (e.g. "PRE OUT").
This audio input must be connected to the output connectors ("OUTPUT") of a preamplifier. If the SP-331
is used in a stereo system, connect the input connectors of the SP-331 with the preamplifier output socket
that are usually labelled "PRE OUT R" and "PRE OUT L". If the SP-331 is used in a multi-channel system,
then the connection sockets of the desired channels in the connection field of the decoder preamplifier
usually marked with "AUDIO OUTPUT" must be connected to the stereo input of this main amplifier.
SP-331
SP-331
Vincent
24

CONNECTING THE PREAMPLIFIER

RCA connection
RCA connection
stereo preamplifier
AV preamplifier