Connection Of The Power Supply - VINCENT PHO-111 Instructions For Use Manual

CONNECTION OF THE POWER SUPPLY

Plug in the power supply cable (8) to the PHO-111 power socket "12–16
V" (6). Check whether the wall mains socket provides the appropriate
mains power, which is the case if it is supplied with 230 V AC 50 Hz. After
all other cable connections have been made push the power supply into a
mains socket. By doing this the PHO-111 is switched on. As long as the
PHO-111 is connected to a live mains supply the Power LED (1) is lit. The
preamplifier PHO-111 is not equipped with a power switch. It should not
be separated from the mains except if you intend not to use it for one or
more weeks. By doing this you make sure the circuitry keeps a constant
temperature to guarantee the best audio quality.
Always connect the AC adaptor to the mains before you switch
on the amplifier/preamplifier!
Vincent
28