Pnp/Pci Configurations - TYAN TRINITY KT400 Manual

Trinity KT400 S2495
3.7 – PnP/PCI Configurations
Options related to all the configurations of PnP / PCI resources.
PNP OS Installed
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI / VGA Palette Snoop
PCI Device List
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
PNP OS Installed:
Select " Yes", if you are using a PNP OS, otherwise select "No".
Yes / No
Reset Configuration Data:
This setting allow you to clear ESCD data.
Enabled / Disabled
Resources Controlled By:
Default whether system resources are controller by BIOS or by user.
Manual / Auto (ESCD)
PCI / VGA Palette Snoop:
Leave as default.
Enabled / Disabled
Phoenix – AwardBIOS CMOS Setup Utility
PnP / PCI Configurations
[No]
[Disabled]
[Auto (ESCD)]
[Press Enter]
[Disabled]
[Enabled]
3-23
http://www.tyan.com
Chapter 3: BIOS Setup
Item Help
_________________________
Menu Level ?
Select Yes if you are using a
Plug and Play capable operation
system Select No if you need
the BIOS to configure n0n-boot
devices