Pnp/Pci Configurations Menu - TYAN TOMCAT K8E-SLI Manual

3.11 PnP/PCI Configurations Menu

Init Display First
Reset Configuration Data
Resource Controlled By
x IRQ Resources
PCI/VGA Palette Snoop
xx PCI Express relatives items xx
Maximum Payload Size
¡ô¡õ¡ö ¡÷: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit
F1: General Help F5: Previous Values F6: Fail-Safe Defaults
F7: Optimized defaults
Init Display First
This BIOS feature allows you to select whether to boot the system using the
PCI Express graphics card or the PCI graphics card. This is particularly
important if you have PCI Express and PCI graphics cards but only one monitor.
PCI Slot / PCI Ex
Reset Configuration Data
This feature allows you to manually force the BIOS to clear the previously saved
ESCD (Extended System Configuration Data) data and reconfigure the settings.
Use this feature when the BIOS can not automtically detect the hardware
change and reconfigure the ESCD.
Enabled/Disabled
Resources Controlled By
When this option is set to AUTO, the BIOS by using ESCD, controls the IRQ
and DMA assignments of all of the boot and PNP devices in the system. If you
set this option to Manual, you will be able to manually assign all IRQ and DMA
information.
Auto (ESCD) / Manual
IRQ Resources
This option is used to manually assign IRQ resources.
Phoenix-AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
[PCIEx]
[Disabled]
[Auto(ESCD)]
Press Enter
[Disabled]
[4096]
http://www.tyan.com
65
Item Specific Help