Table of Contents
Advertisement
3.5 Power Management Setup
Options related to power management can be altered through the following.
ACPI function
ACPI Suspend Type
Power Management
Option
HDD Power Down
Suspend Mode
Video Off Option
Video Off Method
Soft-Off by PWRBTN
PWRON After PWR-Fail
IEQ/Event Activity Detect
VGA
LPT & COM
HDD & FDD
PCI Master
Power On by PCI Card
Modem Ring Resume
RTC Alarm Resume
IRQs Activity Monitoring
3.6 PCI Configuration
Rest Configuration data
Default: Disabled
Resources Controller by
Default: Auto(ESCD)
PCI/VGA Palette Snoop
Default: Enabled
Enabled
Disabled
S1 (POS)
User Define
Maximum Saving
Minimum Saving
Disabled
1,5,10,20,30,45,60 minutes
Disabled
Standby
Sleep
Suspend -> Off
Standby
V/H SYNC+Blank
Blank
Off
Instant-Off
4-seconds
Off
On
Press Enter
Off
On
LPT/COM
LPT
COM
On
Off
On
Off
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Press Enter
Enabled
Disabled
Auto(ESCD)
Manual
Enabled
Disabled
25
http://www.tyan.com
Toggles advanced power and
configuration done by OS.
Defines ACPI system suspend
mode.
Defines the type of power saving
features the system should follow.
Defines hard drive power down
delay.
Defines the method used to power
off the system.
Defines the method used to power
off video.
Defines the method used to power
off graphics.
Defines the action of the power
button when pressed.
Defines whether the system will
remain off if power fails or turn on
when power is restored.
Defines whether the device will
remain active if system enters
Suspend mode.
Defines whether the system can be
powered on by a PCI Card.
Defines whether the system will
wake up if the modem is dialed
into.
Defines the time/date when the
system will wake up.
Leave all settings as is.
Leave as Default.
Defines whether system
resources are controller by BIOS
or by user.
Leave as Default.
Advertisement
Table of Contents
