TYAN TRINITY I845DDR Manual page 24

Serial Port 1, 2
Serial 2 Mode
Serial Base I/O
Serial Interrupt
Parallel Port
Parallel Port Mode
Parallel Address
Parallel IRQ
ECP DMA Channel
Game Port Address
MIDI Port Address
MIDI Port IRQ
Enabled
Disabled
Auto
Enabled
Disabled
3F8, 2F8
3E8, 2E8
IRQ3
IRQ4
Enabled
Disabled
Auto
Output Only
Bi-directional
EPP
ECP
378
278
3BC
IRQ5
IRQ7
DMA1
DMA2
201
330
10
24
http://www.tyan.com
Toggles use of serial ports A and
or B. Enabling ports also requires
you to enter the I/O address for
that port unless you select Auto.
Toggles the onboard Serial 2 port.
These options are dependent on
the IRQ and vice versa.
These IRQs are paired with the
Base I/O option.
Recommended config:
2F8 & IRQ3
3F8 & IRQ4
Enabled requires manual input of
port parameters. We recommend
you leave this option on Auto.
Standard one-way protocol for
parallel devices.
Two-way protocol
Enhanced Parallel Port may
provide higher bandwidth if an
EPP compliant device is used (e.g.
parallel Zip drive).
Enhanced Compatibility Port may
provide higher bandwidth if an
ECP compliant device is used (e.g.
parallel Zip drive).
These options appear when the
parallel port is set to Enabled.
These options appear when the
parallel port is set to Enabled.
These options appear when
parallel port is set to Enabled.
Leave this setting as is. (optional
feature)
Leave this setting as is. (optional
feature)
Leave this setting as is. (optional
feature)