Table of Contents
Advertisement
2.11 – Onboard ATI RAGE XL Graphics (JP31)
Enabled
(default)
Disabled
2.12 – Onboard SCSI (JP25) (Optional)
Enabled
(default)
Disabled
2.13 – Onboard Promise RAID IDE Controller (JP30) (Optional)
Enabled
(default)
Disabled
2.14 – Chassis Intrusion Header (J22 – pins 13, 15)
Certain chassis have a switch that detects whether or not they are being opened. This switch
connects to the Chassis Intrusion Header to sound an alarm when the chassis is being opened
without authorization. Another 4-pin chassis intrusion header, J34, is included in the PCB design
as a manufacturing loading option.
J34
(optional)
Pin 4
GND
OPEN the jumper to enable the onboard ATI RAGE XL graphics
controller. You can also use the onboard video in conjunction with
another PCI graphics card for multiple monitor support.
CLOSE the jumper to disable the onboard ATI RAGE XL.
OPEN the jumper to enable the onboard SCSI feature.
CLOSE the jumper to disable.
OPEN the jumper(s) to enable the Promise RAID IDE Controller.
CLOSE the jumper(s) to disable the Promise RAID IDE Controller.
Pin 3
Pin 2
Intrusion
NC
http://www.tyan.com
Pin1
NC
14
Advertisement
Table of Contents
