Finishing Up - TYAN TOMCAT I875PF User Manual

Tomcat i875PF S5105
NOTE
2.12 – Finishing Up
Congratulations on making it this far! You're finished setting up the hardware aspect of your
computer. Before closing up your chassis, make sure that all cables and wires are connected
properly, especially IDE cables and most importantly, jumpers. You may have difficulty
powering on your system if the motherboard jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find help by asking your
vendor for assistance. If they are not available for assistance, please find setup information
and documentation online at our website or by calling your vendor's support line.
YOU MUST unplug the power supply before plugging in the 20-pin
and 4-pin power cables to motherboard connectors.
http://www.tyan.com
Chapter 2: Board Installation
4-pin +12V power connector
20-pin main power connector
22