TYAN TOMCAT I875PF User Manual page 11

Tomcat i875PF S5105
SATA LED Header (J13)
CMOS Reset (J18)
Pin_1
Pin_2
Pin_1
Pin_1
You can reset the CMOS settings in case an
incorrect setting causes system instability or
you have forgotten your system / setup
password or have just flashed your BIOS by
using these jumpers.
- Power off system, disconnect power supply
from the motherboard
- Set jumper to Clear CMOS
- Wait about 5 seconds
- Set jumper to Normal (Default)
And plug the power supply back into the
motherboard.
8
http://www.tyan.com
Chapter 2: Board Installation
1 2
SATA LED+
GND
Clear COMS
Normal