Advertisement
Instructions for installation and operation
Instrucciones de montaje y de uso
Instructions de montage et de service
Manual de instalação e de instruções
Dear Customer,
Thank you for deciding in favour of the oil water separator AQUAMAT. Please read the present instructions carefully
before installing your AQUAMAT unit and putting it into service. The perfect functioning of the Oil Water Separator
AQUAMAT - and thus reliable condensate treatment - can only be guaranteed if the recommendations and conditions
stated here are adhered to.
¡Estimado cliente!
Les agradecemes que se hayan a favor del separador de aceite/agua AQUAMAT. Sírvase leer las presentes
instrucciones antes del montaje y la puesta en marcha del AQUAMAT. Exclusivamente en caso de una observancia
concienzuda de las prescripciones y advertencias existentes, está garantizado el funcionamiento perfecto del
AQUAMAT y, de esta manera, un tratamiento del condensado fiable.
Cher client,
Vous venez d'acquérir un séparateur huile-eau AQUAMAT et nous vous en félicitons. Nous vous recommandons de
lire attentivement ces instructions avant le montage et la mise en service de l'AQUAMAT et de suivre nos conseils.
Car, seul le respect scrupuleux des prescriptions et consignes données peut garantir le parfait fonctionnement de
l'AQUAMAT et une séparation huile-eau fiable des condensats.
Exmo cliente,
Agradecemos que se decidiu pelo aparelho para separar óleo de água AQUAMAT. Faça o favor de ler com atençãoas
instruçoes antes de montar e pôr o AQUAMAT a funcionar. Só a cumprir as regras e conselhos dados garantem um
funcionamento correcto do AQUAMAT para o polishing de condensado.
AQUAMAT 2, 4, 5R
AQUAMAT 2
AQUAMAT 4
AQUAMAT 5R
english
español
français
português
1
Advertisement
Table of Contents
Related Manuals for KAESER AQUAMAT 2
Summarization of Contents
Important Rules and Guidelines
Safety Aspects
Key safety instructions to prevent damage and injury.
Operational Aspects
Guidelines for operating the AQUAMAT unit efficiently.
Application Aspects
Specifies suitable applications and limitations for the AQUAMAT.
Technical Data and Specifications
Product Identification and Capacity
Order references, container, and filling volumes.
Connection Specifications
Details on condensate feed, water outlet, and oil outlet connections.
Key Components and Filters
Information on oil collector, prefilter, and adsorption filter.
Operational Parameters
Weight, temperature, and maximum operating pressure.
Compressor Performance Data
Screw Compressor Performance
Performance data for screw compressors.
Piston Compressor Performance
Performance data for piston compressors.
Unit Functionality and Components
Condensate Flow and Treatment Stages
Inlet, pressure relief, dirt collection, and oil separation.
Filtration and Discharge System
Filter stages, water outlet, and sampling.
Installation Best Practices
Correct Installation Methods
Demonstrates proper installation methods.
Continuous Slope Requirement
Importance of downward slope for collection lines.
Floor Leveling for Oil Escape
Ensuring oil collector is level for oil escape.
Installation Guide
Original OEKOSORB Filter Identification
How to identify genuine OEKOSORB filters.
Installation Area Requirements
Requirements for the installation location.
Oil Collector Connection
How to connect the oil collector.
Condensate Inflow Connection
Connecting the condensate feed lines.
Installation Procedures
Connecting the Feed Line
Step-by-step guide to connecting the inlet hose.
Using a Collecting Line
Connecting a collecting line using the installation set.
Wastewater Drain Requirements
Requirements for the wastewater discharge point.
Connecting the Wastewater Hose
How to connect the outlet hose.
Operation Setup and Readiness
Optional Heating System Installation
Notes on installing the optional heating system.
Level Indicator and Oil Outlet Checks
Verifying indicator movement and oil discharge setting.
Initial Water Fill and Unit Readiness
Initial filling process and confirmation of operational readiness.
Maintenance and Testing
Weekly Wastewater Quality Test
Procedure for testing discharged water quality.
Oil Collector Maintenance
Actions for when the oil collector is full or not discharging.
Level Indicator Troubleshooting
Troubleshooting the level indicator.
Leak Inspection and Repair
How to inspect and fix leaks.
Filter Replacement
Filter Replacement Procedure
Step-by-step guide for replacing filters.
Routine Maintenance Procedures
Dirt Collector Cleaning
Recommended cleaning procedure for the dirt collector.
Oil Outlet Check and Cleaning
How to check and clean the oil outlet.
General Unit Cleaning
Recommended procedure for overall unit cleaning.
Post-Maintenance Steps
Steps to take after cleaning the unit.
Accessories and Parts Catalog
OEKOSORB Filter Sets
Part numbers for OEKOSORB filter sets.
Optional Heating Systems
Part numbers for optional heating systems.
Condensate Manifold for Parallel Operation
Accessory for connecting multiple AQUAMAT units.
Heating for Condensate Manifolds
Heating system for condensate manifolds.
Need help?
Do you have a question about the AQUAMAT 2 and is the answer not in the manual?
Questions and answers