Parent Unit - Philips AVENT SCD520 - Avent DECT Baby Monitor Monitoring System User Manual

ENGLISH
12
3 Reattach the lid.
Note: When the batteries are low, the battery light on the baby unit fl ashes red.

Parent unit

Battery operation (rechargeable battery pack)
The parent unit comes with a SCD520 NiMH rechargeable battery pack.
Charge the parent unit before you use it for the fi rst time or when
the parent unit indicates that the battery pack is low (the empty
battery symbol fl ashes on the display and the parent unit beeps). The
parent unit starts indicating that the battery pack is low 30 minutes before
the battery pack is completely empty.
Note: If the battery pack is completely empty, the parent unit automatically
switches off and loses contact with the baby unit.
1 Remove the lid of the compartment for the rechargeable battery
pack.
2 Insert the rechargeable battery pack.
Note: Make sure the + and - poles of the battery pack point in the right
direction.
3 Reattach the lid.
4 Insert the small appliance plug into the charger, put the adapter in
a wall socket and place the parent unit in the charger.
, The charging light on the charger goes on.
, The display shows a charging battery symbol to indicate that the
parent unit is charging.