Related Manuals for Varde Shape 2 Air
Summary of Contents for Varde Shape 2 Air
- Page 1 Varde Shape 1 Varde Shape 1 Stone Varde Shape 2 Varde Shape 2 Stone Varde Shape 13 Installation and User Manual Revision 4 Pottemagervej 1, 7100 Vejle, Denmark. www.vardeovne.dk...
-
Page 2: Table Of Contents
Wood-burning stoves from VARDE stand on the stylistic bedrock of Scandinavian design – created with the ambition of unifying quality, functionality and design. With a VARDE stove, you and your family are ensured a warm gathering point and tranquil quality moments for many years into the future. - Page 3 Technical data, Shape 1 Combustion chamber: (H x W x D): Height (cm) 26-38x30.0x30.0 cm Width (cm) Depth (cm) Smoke outlet Ø 15 cm Weight (kg) Installation height, top: 106 cm Output 3-7 kW Installation height, rear: 97 cm Nominal output 5.4 kW...
- Page 4 Technical data, Shape 2 Combustion chamber: (H x W x D): Height (cm) 26-38x30.0x30.0 cm Width (cm) Depth (cm) Smoke outlet Ø 15 cm Weight (kg) Installation height, top: 96 cm Output 3-7 kW Installation height, rear: 87 cm Nominal output 5.4 KW Installation height fresh air supply: 12 cm Heated area...
- Page 5 Technical data, Shape 13 Combustion chamber: (H x W x D): Height (cm) 26-38x30.0x30.0 cm Width (cm) Depth (cm) Smoke outlet Ø 15 cm Weight (kg) Installation height, top: 106 cm Output 3-7 kW Installation height, rear: 97 cm Nominal output 5.0 kW Installation height fresh air supply: 22 cm Heated area...
- Page 6 Technical data Shape 1 Stone Combustion chamber: (H x W x D): Height (cm) 26-38x30.0x30.0 cm Width (cm) Depth (cm) Smoke outlet Ø 15 cm Weight (kg) Installation height, top: 106 cm Output 3-7 kW Installation height, rear: 97 cm Nominal output 5.4 kW...
- Page 7 Technical data Shape 2 Stone Combustion chamber: (H x W x D): Height (cm) 26-38x30.0x30.0 cm Width (cm) Depth (cm) Smoke outlet Ø 15 cm Weight (kg) Installation height, top: 96 cm Output 3-7 kW Installation height, rear: 87 cm Nominal output 5.4 kW Installation height fresh air supply: 12 cm...
- Page 8 Fireplace Inspection Name: Address Im Lopperfeld 34b, 46047 Oberhausen, Germany Product Varde Product type Shape 1, 2, 13, 1 stone and 2 Stone Type designation Wood-burning stove, suitable for intermittent use Standard Construction product (89/106/EC/) standard used EN 13240 Application...
-
Page 9: Installation Distances
General advice and instructions are available on the Varde Ovne website. www.vardeovne.dk Floor material: If the stove is to stand on a flammable floor, then the floor area on which it stands must natu- rally be covered by a non-combustible material, e.g. a steel sheet, glass sheet, tiles or artificial slate sheet. - Page 10 Rear : 10 cm Distance to furniture: 80 cm NB: Note that B (from chimney to wall) is a recommendation. There may be different local/national rules. Shape 1, 2, 13, 3, 1 stone and 2 Stone 10 cm 25 cm 22,5 cm...
-
Page 11: Chimney
If required, refer to your chimney inspector, who will help you to set the correct height. Condensation drain in the flue collar Your stove is fitted with a cast iron flue collar from Varde Ovne. The flue collar is designed for a flue pipe (chimney) with an inner diameter of 150 mm. - Page 12 Connecting the chimney: Connect the stove using the top outlet. Connect the stove using the rear outlet. 1: Cut the discs out in both back plate layers 2: Unscrew the bolts in the flue collar and facing plate 3: Swap the facing plate and the flue collar 4: Screw the bolts in the facing plate and flue collar 5: Put the top plate into position.
-
Page 13: How It Works
Fuel air damper or How it works: secondary air Pull the damper forward to open for air. Open Closed Shaker grate open Shaker grate closed Kindling air Kindling air On ash pan -closed On ash pan - Open Remember to close the kindling air again once the fire is well established. - Page 14 Tertiary airflow is a constant supply of air that ensures the stove burns more cleanly and, among other things, reduces the burning mate- rial’s content of tar and soot particles to the absolute minimum sizes. With optimal burning you will see that the glass and the combustion chamber will burn completely cleanly and there will be a minimal amount of ash left by the fire.
-
Page 15: How To Light Up And Use Your Wood-Burning Stove
How to light up and use your wood-burning stove: When you use the stove for the first time, the surface coating will cure and smoke will come from the stove and it will have a slightly pungent smell, which will disappear after a good airing. We therefore recommend that you open the doors and windows so there is airflow to/from outside. -
Page 16: Overview Of Loose Parts
Shape 1, 2, 13, 1 stone and 2 stone Overview of loose parts Shaker grate Log retainer Vermiculite Ash pan Cast-iron door Top plate Air rosette for kindling air Secondary air damper Throttle for shaker grate Tertiary air beam (tertiary airflow) - Page 17 The panels are insulating and ensure that the wood-burning stove does not wear out. Vermicu- lite panels are not covered by the warranty. Vermiculite is a very porous material and must be handled with care. Only original spare parts from Varde Ovne A/S may be used. Smoke guide plate Outer side plate...
- Page 18 What can you make a fire with? This Varde stove has been approved and tested for the combustion of wood. Only dry wood may be used with a max. water content of 21% and a size that is suitable for the combustion chamber.
-
Page 19: Maintenance
Remember to lubricate the door hinges as required. Glass We recommend the use of VARDE glass cleaner to clean the pane; this can be bought from our dealers. The ash pan must be emptied regularly, and the ash can be disposed of along with your domestic waste. - Page 20 Log retainer, product no. and EAN number All models : 100482 / 5703505040179 Top Cover, product no. and EAN number Shape 1 and 2 Stone :100701 / 5703505049233 (Steel Ø165 VO logo ) Shape 1 and 2 : 100266 / 5703505033546 (Cast iron) Glass, product no.
- Page 21 How to correct a fault. Smoke entering room • Poor draught in the chimney. • Check that the flue and chimney are not blocked. • Check that the chimney height is correct in accordance with the surroundings. Glass and/or chimney soot: •...
-
Page 24: Warranty
Warranty All Varde stoves undergo substantial quality control, and we take pride in supplying the same high quality at all times. We do, however, offer a 5-year warranty for any manufacturing defects, should they occur. The warranty does not cover: ...
Need help?
Do you have a question about the Shape 2 Air and is the answer not in the manual?
Questions and answers