Related Manuals for Varde Shape 2
Summarization of Contents
Installation Inspection and Requirements
Compliance with Regulations
Comply with all local regulations and seek expert advice for installation.
Professional Installation Advice
Recommend seeking advice from a dealer or competent technician for installation.
Installation Reporting Duty
Local chimney inspector has a duty to report installation completion.
Installation Distances and Floor Placement
Safe Floor Material Placement
Specify non-combustible floor covering and minimum overhangs for safe placement.
Ensuring Adequate Fresh Air
Ensure sufficient fresh air supply for effective combustion, e.g., ventilation valves.
Chimney Connection and Condensation
Condensate Drain Installation
Instructions on creating a condensate drain in the flue collar for proper function.
Stove Operation Principles
Air Dampers and Grate Control
Explanation of the fuel air damper control and shaker grate operation.
Kindling Air Management
Guidance on using and closing the kindling air for efficient starting.
Airflow Management and Overheating
Tertiary Airflow System
Constant supply of air for cleaner burning and reduced emissions.
Combustion Air Supply
Pre-warmed air for combustion, adapted based on chimney draught.
Preventing Stove Overheating
Causes and consequences of overheating, including chimney fire risks.
Stove Lighting and Usage Guide
Initial Stove Curing and Operation
Instructions for initial use, curing the surface coating, and proper door operation.
Top-Down Fire Lighting Method
Recommended eco-friendly method for lighting the fire from top to bottom.
Adjusting Stove Heat Output
How to reduce heat output by adjusting fuel amount and combustion air.
Vermiculite Panel Maintenance
Replacing Vermiculite Cladding
Step-by-step guide on how to replace worn vermiculite panels in the combustion chamber.
Fuel Selection and Preparation Guide
Best Wood Types and Sizing
Guidance on the best wood types and sizing for optimal burning and efficiency.
Safe and Prohibited Fuels
Information on suitable wood and materials to avoid for safe and efficient operation.
Routine Maintenance and Safety
Stove Cleaning and Maintenance
Cleaning procedures for glass, ash pan, interior, and checking gaskets.
Procedure for Chimney Fires
Instructions on what to do if a chimney fire occurs, including immediate actions.
Troubleshooting and Recycling Procedures
Resolving Common Stove Faults
Solutions for common issues like smoke entering room, soot, and poor heating.
Recycling Guidelines for Components
Guidelines for proper disposal and recycling of packaging, ceramic glass, and vermiculite.
Need help?
Do you have a question about the Shape 2 and is the answer not in the manual?
Questions and answers