Related Manuals for ABB EntelliGuard
Summary of Contents for ABB EntelliGuard
- Page 1 Operation & Maintenance Manual GEK-99986 Catalog # WPEGRRLV 115 VAC, 60/50 Hz Low Voltage WavePro EntelliGuard Circuit Breakers Remote Racking Operator For Small Frame Breakers 800A - 2000A and Large Frame Breakers 3200A - 5000A...
-
Page 2: Section 1. Introduction
The remote racking operator is portable and is racking motor and gearbox attached to the front designed for attachment to the WavePro & of the breaker. The remote racking operator Entellisys Low Voltage Power Circuit Breaker in requires 115Vac, 50/60Hz control power. -
Page 3: Section 3.Description
Attach the Remote Racking Operator to the The drive train is made of a gear motor (1, fig. 1), WavePro breaker by first depressing the OPEN And a square drive socket (2, fig. 1), which button on the front of the breaker. - Page 4 Remote Racking Operator for AKD-10 8 – Breaker Cover AC Plug Latch Opening 6 – Circuit Breaker Reset toggle Switch 30 foot cable 2 – Square drive Coupling 3 – Start Switch to Breaker Push Button 7 - Sliding 4 – Hand-Held Latch Control Box 5- IN/OUT...
- Page 5 ATTACHMENT / REMOVING DEVICE Racking operator – 3200-5000A Frame Attaching the Remote Racking Operator to WavePro Breakers the Large Frame WavePro or Entellisys circuit breaker The remote racking operator consists of a drive The circuit breaker must be in the OPEN position train, control switches, and attachment brackets.
- Page 6 Remote Racking Operator for AKD-10 Racking Screw Access Hole 7 – ¼ turn latch/Rod to mount to breaker 1-Motor and Gear Housing 6 – Circuit Breaker Reset Toggle Switch 5 – IN/OUT Directional Toggle Switch 4 – Hand Held Control Box 3 –...
- Page 7 Section 4. Modifications 4-1 Converting Large Frame Breaker to work with Remote Racker 1- Connecting Bracket – Align 1 to existing holes in breaker frame. 2,3,4,5 – ¼ -20 Bolt, Nut and Washers – Add ¼ in ch hardware to existing hole of bracket 1 and frame in upper position as shown.
- Page 8 4-2 Changing to Large Frame Breaker Door to work with Remote Racker Remote Racking Attachment Access holes Kit WPEGRRLFDR - 3200/4000A Wave Pro Door Kit WPEGRRLFDRDI- 3200/4000A Wave Pro Door with Defeatable Interlock Kit WPEGRR50DR – 5000A Wave Pro Door Kit WPEGRR50DRDI- 5000A Wave Pro Door with Defeatable Interlock...
- Page 9 Should further information be desired or should particular problems arise that are not covered sufficiently for the purchaser's purposes, the matter should be referred to the ABB Inc. —...
Need help?
Do you have a question about the EntelliGuard and is the answer not in the manual?
Questions and answers