Language Selection
The language displayed can be set (
Once you change the language, installation of the program starts.
Caution
Once the installation of the program starts, do not stop the engine of your car
until the installation is completed.
➲
If you change the language used, the set password is cleared. If desired, set the password
again (see "Registering a Password" on page 79).
Return Home
Registering and changing your home location (
Location" on page 76
Go to ...
Registering and changing your favorite location (
ite Location" on page 76
Modify Current Location
Move the joystick to up/down or left/right to adjust the current location of your car and direc-
tion displayed on a map.
Display Adjustment
The display position of the screen of your Navigation System is adjusted. To adjust the
screen, move the joystick up/down and left/right. Adjust to the optimal position, making sure
that all four corners of the display are visible.
sCUE [Traffic Information] menu
Traffic Reroute Alert
This setting controls whether, when a traffic jam on the set route is received, to display a mes-
sage. On this message, you can select whether to calculate a route by taking traffic jam into
account.
On* : Confirming message is displayed.
Off :
Confirming message is not displayed. Route calculation is not carried out, when a
traffic jam occurs on the route.
Avoid Traffic on Route
This setting controls whether, when a traffic jam occurs on the route, to calculate a route by
taking traffic jam into account.
On* : Route calculation is carried out by taking a traffic jam into account.
Off :
Route calculation is carried out without taking a traffic jam into account.
Input CUE Access Code
The PIN code obtained from CUE is set (
100
see "Setup 3: Installing the Program" on page 28
).
).
see "Registering Your Home and Your Favorite
see "Registering Your Home and Your Favor-
see "Entering the PIN code" on page 82
).
).