Pioneer AVIC-9DVD Operation Manual page 26

Dvd navigation unit
Hide thumbs Also See for AVIC-9DVD:
Table of Contents

Advertisement

(5) BACK button
While using a menu, pressing this button cancels the present operation and returns you to the
previously displayed menu or list.
(6) Mode switch
Using the Remote Controller, you can switch to operate either the Navigation System or the
DVD/CD. If switching the operation mode, the function of each button on the Remote Con-
troller is also switched (
).
page 113
(7) VOL dial
When you turn the dial downwards, the volume decreases. Turning it upwards increases the
volume.
• When the Dipswitch 2 is OFF, volume of the voice guidance of the Navigation System is
adjusted.
• When the Dipswitch 2 is ON, the volume of Pioneer Head Unit is adjusted. If the dial is
pressed, the volume is reduced to around 1/10th of the volume (ATT function). When
pressed again, the volume returns to its previous level.
(8) NAVI button
You press the NAVI button to view the map or return to guidance. Also, when the map is
scrolled, pressing this button returns to the display of the map of your surroundings.
(9) MENU button
Pressing the MENU button displays a menu of options.
(10) DETOUR button
Press this button to restart route calculation, such as calculating a detour. If this button is
pressed for more than two seconds, you can see the information (passing roads and driving
distance, and so on) of the route down which you are currently being guided
(
see Chapter 4 "Guidance to Your Destination"
(11) CANCEL ROUTE button
Press this button to cancel the route guidance. When pressed for more than two seconds, the
next way point is recognized as already being passed, and a new route calculation starts
(
see Chapter 4 "Guidance to Your Destination"
(12) GUIDE button
Press this button if you did not hear the voice guidance properly. If this button is pressed for
more than two seconds, you can listen to traffic information (where available.).
(13) Numeric keypad
You use this pad for entering characters or numbers.
(14)
(AUDIO) button
Use this button when the Navigation System is combined with another manufacturer's dis-
play. This button is used only when the navigation image (RGB image) is output from RCA
Video output (yellow) of the Hide-away Unit of this product. (For details, see the installation
manual.)
When combined with CD-TS36, sound is output from the Voice Guidance Speaker with
infrared sensor.
(15) DELETE button
Press to delete the character you just entered. If you press this button for more than two sec-
onds, all the characters entered will be deleted.
24
see "How to Listen to a CD" on page 110
and
).
).
"How to Watch DVD" on

Advertisement

Table of Contents
loading

Table of Contents