Advertisement
Quick Links
PLEASE CONTACT MOEN FIRST
For Installation Help, Missing or Replacement Parts
(USA) 1-800-BUY-MOEN (1-800-289-6636) www.moen.com
(Canada) 1-800-465-6130 www.moen.ca
POR FAVOR, CONTÁCTESE PRIMERO CON MOEN
Para obtener ayuda de instalación, piezas faltantes o de
recambio
(Costa Este) 011 52 (800) 718-4345 www.moen.com.mx
VEUILLEZ D'ABORD CONTACTER MOEN
En cas de problèmes avec l'installation, ou pour obtenir
toute pièce manquante ou de rechange
(Canada) 1-800-465-6130 www.moen.ca
HELPFUL TOOLS
For safety and ease of faucet replacement, Moen
recommends the use of these helpful tools.
HERRAMIENTAS ÚTILES
Para que el cambio de la llave sea fácil y seguro, Moen
le recomienda usar estas útiles herramientas.
OUTILS UTILES
Par mesure de sécurité et pour faciliter l'installation,
Moen suggère l'utilisation des outils suivants.
Adjustable Wrench
Safety Glasses
Llave ajustable
Gafas de seguridad
Clé ajustable
Lunettes de sécurité
Sealant
Sellador
Mastic
Phillips Screwdriver
Destornillador Phillips
Tournevis Phillips
Thread Seal Tape
Cinta para sellar roscas
Ruban pour joints filetés
TWO-HANDLE WIDESPREAD
LAVATORY FAUCET
LLAVE DE LAVABO DE DOS MANIJAS
ROBINET DE LAVABO
À DEUX POIGNÉES ÉLOIGNÉES
Image is for reference only
(Style varies by model)
La imagen es sólo como referencia
(El estilo varía por le modelo)
Cette image n' est offerte qu'à titre indicatif seulement
(Le style varie selon le modèle)
Record Purchased Model Number:
Registro del número de modelo comprado:
Consigner ici le numéro du modèle acheté :
_______________________
(Save instruction sheet for future reference)
(Guarde la hoja de instrucciones para futura referencia)
(Garder ces directives pour référence ultérieure)
Register Online:
Regístrese en línea:
S'enregistrer en ligne :
www.moen.com/product-registration
INS10615F - 2/24
Advertisement
Related Manuals for Moen TV6620ORB
Summarization of Contents
Contact and Support Information
Moen Contact Details
Provides phone numbers and website for installation help and parts.
Installation Preparation
Helpful Tools for Installation
Lists recommended tools for safe and easy faucet replacement.
Model Number and Registration
Instructions to record the model number and register the product online.
Faucet Parts Identification
Main Parts List
Lists and identifies all components included with the faucet assembly.
Model-Specific Parts
Details specific parts for certain models, such as mounting brackets.
Important Installation & Removal Notes
Installation Requirements
Specifies minimum hole diameters for spout and valve installation.
Old Faucet Removal Caution
Safety advice to turn off water supply before removing the old faucet.
Drain Assembly Parts
Drain Components
Lists parts for the push-down drain plug, including body, gaskets, and nuts.
Drain Type A Components
Details specific parts for Drain Type A, such as drain body and cone gasket.
Drain Type B Components
Details specific parts for Drain Type B, including lift rod and pivot rod.
Spout Installation
Install Spout into Sink Deck
Guide for inserting the faucet spout into the sink opening.
Mounting Bracket Installation
Mounting for Thin Sink Decks (<1")
Illustration for installing the mounting bracket on sink decks less than 1 inch thick.
Mounting for Thick Sink Decks (>1")
Illustration for installing the mounting bracket on sink decks greater than 1 inch thick.
Specific Model Mounting
Install Mounting Bracket and Plate
Steps for installing mounting bracket and plate for certain models on thin sink decks.
Mounting for Thicker Sink Decks (Specific Models)
Illustrates mounting for specific models on sink decks greater than 1 inch.
Securing the Faucet Base
Attach Mounting Tool and Tighten
Instructions for attaching the mounting tool and tightening the bracket nut.
Correct Washer Orientation
Guidance on the correct installation orientation of the upper mounting washer.
Apply Sealant to Washers
Instructions for applying sealant to the underside groove of mounting washers.
Valve Body Installation
Insert Valve Bodies
Steps for inserting hot and cold valve bodies through mounting washers.
Attach Mounting Ring
Instructions for partially installing screws from the mounting ring.
Secure Valve Body Assembly
Steps for sliding mounting washer and ring, then tightening.
Waterway and Hose Connections
Prepare Valve Bodies
Instructions for removing protective sleeves from valve bodies.
Connect Quick Connect Hose
Steps for attaching the quick connect hose to the waterway tube and valve bodies.
Set Valve Stems
Guidance on turning valve stems to the closed position.
Handle Installation
Attach Faucet Handles
Instructions for installing the faucet handles onto the valve bodies.
Secure Handle Base
Guidance on holding the handle lever and tightening the base to the sink deck.
Drain Type A Installation
Prepare Sink Drain Opening
Steps to clean the sink drain opening for waste installation.
Install Drain Body
Instructions for placing the drain body and gasket into the sink opening.
Drain Type A Assembly
Attach Cone Gasket and Nut
Steps for installing the cone gasket and tightening the drain mounting nut.
Install Push-Down Drain Plug
Instructions for installing the push-down drain plug and actuating the mechanism.
Drain Type B Preparation
Prepare Sink Drain Opening
Cleaning the sink drain opening and applying sealant to the waste seat.
Insert Waste Seat
Instructions for inserting the waste seat into the sink drain opening.
Drain Type B Assembly
Assemble Drain Body and Waste Seat
Steps for assembling the drain body to the waste seat and tightening by hand.
Install Lift Rod and Strap
Instructions for installing the lift rod through the faucet and into the strap.
Align Pivot Rod Opening
Ensuring the pivot rod opening on the drain body points correctly.
Final Drain Tightening
Final tightening of the drain hex nut to the drain body using a wrench.
Pivot Rod Installation Options
Install Pivot Rod (Y) Downward
Steps for pushing the pivot rod downward and securing it with a clip.
Slide Pivot Rod Through Clip and Strap
Instructions for sliding the pivot rod through the clip and strap holes.
Final Drain Adjustments and Plumbing
Adjust Lift Rod Strap
Loosening the nut on the lift rod strap to allow the lift rod to rest.
Attach Flexible Supply Lines
Connecting flexible supply lines to the valve bodies and tightening them.
Completing Plumbing Connections
Secure Supply Lines to Stops
Tightening the flexible supply lines to the water stops using a wrench.
Final Water Test and Completion
Turning on the water to confirm installation is complete and functional.
Faucet Flushing Procedure
Prepare for Flushing
Instructions for removing the aerator using the aerator tool.
Flush Debris from Faucet
Running water for 15 seconds to flush any possible debris from the faucet.
Re-install Aerator
Re-installing the aerator onto the spout and finger-tightening it.
Flushing Procedure Continuation
Turn Faucet Handles Off
Turning off the faucet handles to complete the flushing process.
Remove Hose from Waterway
Instructions for removing the hose from the spout waterway.
Spout Waterway Maintenance
Remove Spout Waterway Adapter and Filter
Steps for removing the spout waterway adapter and the filter.
Flush Filter Separately
Guidance on flushing the filter at a separate faucet, with a caution to plug the sink.
Screen Filter and Waterway Assembly
Lubricate and Insert Screen Filter
Applying lubricant to the screen filter and pushing it into the spout waterway.
Secure Spout Waterway
Using wrenches to hold and tighten the spout waterway sections.
Hose Connection to Waterway
Connect and Test Hose Engagement
Connecting the hose to the spout waterway and testing engagement with a click.
Need help?
Do you have a question about the TV6620ORB and is the answer not in the manual?
Questions and answers