TYAN TIGER K8SSA Manual page 55

3.5.8 – Hardware Health Configuration Sub-Menu
You can use this screen to view the Hardware Health Configuration Settings.
Use the up and down arrow ( / ) keys to select an item. Use the Plus and
Minus (+/-) keys to change the value of the selected option. The settings are
described on the following pages.
Main Advanced
Hardware Health Configuration
H/W Health Function
FAN Select
Auto FAN1, 2 Power Control
PWM Minimal Duty Cycle
Auto FAN3, 4 Power Control
PWM Minimal Duty Cycle
FAN Fail LED Indicator
Hardware Health Event Monitoring
Mainboard Voltages Report
CPU1 Temperature
CPU2 Temperature
Mainboard Ambient Temperature
FAN1 Speed
FAN2 Speed
FAN3 Speed
FAN4 Speed
Feature
Hardware Health Configuration
H/W Health Function
FAN Select
Auto FAN1, 2 Power
Control
BIOS Setup Utility
PCI/PnP Boot
[Enabled]
[4Pin FAN]
[Disabled]
[50% Duty Cycle]
[Disabled]
[50% Duty Cycle]
[Disabled]
:xx C/ xxx F
:xx C/ xxx F
:xx C/ xxx F
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
Option
Enables Hardware Health Monitoring Device.
Enabled
Disabled
Selects the FAN type.
4Pin FAN
3Pin FAN
FAN power duty cycle is auto dynamic
programmed in selected temperature range.
Enabled
Disabled: Fan Power On.
Enabled: Fan Power Duty Cycle=30%(40˚C)-
Disabled
http://www.tyan.com
Security
Enables Hardware
Health Monitoring
Device.
← → Select Screen
↑↓ Select Item
+/-
Tab Select Field
F1
F10 Save and Exit
ESC Exit
Description
100%(60˚C), see CPU temperature
55
Chipset Exit
Change Option
General Help