TYAN TIGER MPX Manual page 23

Table of Contents

Advertisement

(Advanced Setup continued)
Base I/O
Interrupt
Parallel Port
Mode
Base I/O
Interrupt
DMA Channel
Boot-time diagnostics
Screen
Summary Screen
CPU SDRAM Frequency
Console Redirect
3.3 – Chipset Configuration
Options such as graphics and memory settings can be altered in this section.
Graphics Aperture
SERR Signal Condition
ECC Config
3F8, 2F8
These options are dependant on the IRQ
3E8, 2E8
settings below and vice versa. They set the I/O
address for the serial ports.
IRQ3
These options are dependant on the Base I/O
IRQ4
settings and vice versa. They set the IRQ for the
serial ports.
Enabled
Toggles the Parallel Port. Use this port for
Disabled
devices such as printers or Zip drives.
Auto
Defines the mode that the Parallel port will operate in. Leave on
default setting for most compatibility.
These options appear when the Parallel Port is enabled and allows
you to set the Base I/O address.
IRQ5
These options appear when the Parallel Port is
IRQ7
enabled.
Enabled
Toggles the Parallel Port. Use this port for
Disabled
devices such as printers or Zip drives.
Auto
This option toggles the diagnostics screen that appears during
bootup.
This option toggles the boot summary screen before OS load.
This option allows you to set the operating frequency of system
memory. Leave as default for best stability.
This option allows you to pass the display console through a LAN for
control on another computer.
32MB
64MB
128MB
256MB
512MB
1GB
None
None
Single bit
Multiple bits
Both
Disabled
EC (Single bit)
ECC (multiple bits)
ECC Scrub
23
http://www.tyan.com
Defines the size of system memory reserved
for AGP graphics data such as textures.
Usually, the higher the setting, the better
AGP performance, regardless of how much
actual RAM you have installed on your
motherboard.
Toggles the ERR signal in the listed
conditions. Leave at default setting.
Toggles memory correction.
EC – Error checking and status reporting
enabled. Data is not corrected.
ECC – EC but data is corrected.
ECC Scrub – ECC with memory contents
corrected after all reads with errors.

Advertisement

Table of Contents
loading

This manual is also suitable for:

S2466

Table of Contents