Table of Contents
Advertisement
Finishing Installing the Heatsink
After you finish installing the heatsink onto the processor and socket, attach the end wire of the
fan (which should already be attached to the heatsink) to the motherboard. The following diagram
illustrates how to connect fans onto the motherboard.
After you're finished installing all the fans you can connect your drives (hard drives, CD-ROM
drives, etc.) to your motherboard.
2.12 Installation Guide of Xeon Processor Reinforcement Kit (CPU Back-plates)
1)
Check the parts in the kit: two back-plates and 9 screws. (Four screws for each plate
and one spare screw.)
2)
The back-plates must be installed prior to installing the motherboard into a chassis.
3)
Ensure that the screws have firmly secured the motherboard between the CPU
retention bases and the back-plates.
20
http://www.TYAN.com
Advertisement
Table of Contents
