Related Manuals for ClayTech C5X
Summarization of Contents
Standards and Approvals
RCM Compliance Mark
Represents compliance with EESS and ACMA labelling requirements for electrical safety.
AS/NZS 4020 Drinking Water Approval
Demonstrates compliance with Australia & New Zealand Standards for products in contact with drinking water.
CE Marking Explained
Indicates conformity with EU health, safety, and environmental directives.
Pump Assembly Instructions
Connecting Controller to Pump
Guide for attaching the pump controller to the pump unit using quick-connect unions.
Pump Installation Guide
Suction Line Installation Best Practices
Recommendations for installing the pump's suction pipe for optimal performance and preventing issues.
Tank Fed Installation Procedure
Specific instructions for tank fed installations where water level is higher than the pump.
Suction Lift Installation Procedure
Instructions for suction lift installations where water level is lower than the pump.
Discharge Line Installation Best Practices
Recommendations for installing the pump's discharge pipe to ensure efficient operation.
General Installation Considerations
Important general considerations for pump installation, including location and protection.
Pump Operation Guide
Initial Start-Up and Priming
Step-by-step guide for filling and starting the pump for the first time.
Controller Automatic Operation
Explanation of how the automatic controller manages pump start/stop based on pressure and flow.
Dry Run Protection and Restart
Details on detecting and responding to a lack of water, including restart cycles.
Maintenance and Cleaning
Cleaning the Suction Filter
Instructions for cleaning the pump's suction filter cartridge to maintain performance.
Need help?
Do you have a question about the C5X and is the answer not in the manual?
Questions and answers