Page 3
INDEX 1. APPLICATIONS ............................1 2. PUMPABLE LIQUIDS ..........................1 3. TECHNICAL DATA AND LIMITATIONS OF USE ..................1 4. MANAGEMENT ............................2 Storage ..............................2 Transport ............................... 2 Weight and dimensions ........................2 5. WARNINGS ..............................2 6. INSTALLATION ............................2 7.
Page 4
ENGLISH Draining dirty water Model P1=330 EcoSub 7 Electrical data P1 Rated absorbed power [W] Mains voltage [VJ 220-240 AC Mains frequency fHzl Current [A] Capacitor [µ F] Capacitor [Vcl Hydraulic data Max. flow rate fl/minl Max. head [m] Max. head [bar] 0.55...
Page 5
ENGLISH • Pay attention to ensure that the float is free to move, leave at least 5 cm from the wall of the trap. & • The dimensions of the trap must always be in relation to the quantity of water arriving and to the flow of the pump, so as not to subject the motor to excessive starts/hour;...
Page 6
10.1 Cleaning the suction grid 10.2 Cleaning the impeller (F ig. 7) (F ig. 8) • • Switch off the electric power supply to the pump. Switch off the electric power supply to the pump. • • Drain the pump. Drain the pump.
Page 7
& 12. GUARANTEE Any modification made without prior authorisation relieves the manufacturer of all responsibility. All the spare parts used in repairs must be authentic and all accessories must be authorised by the manufacturer, in order to ensure maximum safety of the machines and of the systems in which they may be installed.
Page 8
WHITE INTERNATIONAL PTY LTD WHITE INTERNATIONAL NZ LTD 60 Ashford Ave Milperra NSW 2214 15G Kerwyn Avenue PO Box 304 Milperra NSW 2214 East Tamaki, Auckland 2013, New Zealand Phone 02 9783 6000 Fax 02 9783 6001 Phone 09 579 9777 Fax 09 579 7775 Customer Service 1300 783 601 Customer Service 0800 509 506 Email Sales: pumpsales@whiteint.com.au...
Need help?
Do you have a question about the EcoSub 7 and is the answer not in the manual?
Questions and answers