Advertisement
Quick Links
CONTACT US
T 1300 798022
sales@claytonengineering.com.au
BRISBANE
26 French Avenue,
Brendale, Qld, 4500
T 1300 798 022
F 07 3881 2780
• INSTALLATION • OPERATION • TROUBLE SHOOTING •
For any assistance or after sales service call Claytech on our toll free number 1300 798 022.
Please have a look at further quality Claytech products at www.claytech.com.au
CL_SUB.OM_03.2012
MELBOURNE
24 Healey Rd,
Dandenong South, Vic, 3175
T 03 9706 9922
F 03 9706 9533.
SUBMERSIBLE PUMPS
OWNERS MANUAL
BLUESUB 6
CLEAN WATER
BLUEDIVER
VORT 510
PROVORT 540
• INSTALLATION • OPERATION • TROUBLE SHOOTING •
For any assistance or after sales service call Claytech on our toll free number 1300 798 022.
Please have a look at further quality Claytech products at www.claytech.com.au
FILTERED
GREY WATER
BLUESUB 15
PROSUB 6/9
BVP
PROVORT 500
DIRTY WATER
VORTEX PUMPS
Advertisement
Related Manuals for ClayTech PROSUB 6
Summary of Contents for ClayTech PROSUB 6
- Page 1 • INSTALLATION • OPERATION • TROUBLE SHOOTING • For any assistance or after sales service call Claytech on our toll free number 1300 798 022. For any assistance or after sales service call Claytech on our toll free number 1300 798 022.
- Page 2 1. SAFETY INSTRUCTIONS 6. MAINTENANCE AND CLEANING Carefully read these instructions before starting the pump. Before doing any maintenance on the pump, always remove the plug from the power supply. For safety reasons, persons who have not read the instructions shall not be authorised to Wear protective cloths when doing any maintenance work, gloves, protective eye wear use the pump.
- Page 3 Problem Possible Cause Solutions 2. TECHNICAL DATA & SUITABLE APPLICATIONS Pump delivers little a) suction screen on some a) Clean suction screen or no water models could be clogged. b) Air bubble in the pump b) submerged pump should be Model ProVort500 Vortort510 ProVort540 BVP ProSub6 ProSub9 body tilted and gently shaken with...
- Page 4 3. OPERATION 4. STARTING THE PUMP The pump must only be used when immersed in water. If the water runs out the pump First time the pump is used, if it has a side outlet it should be placed on its side under must be stopped by either the float switch or turning off the power switch.
Need help?
Do you have a question about the PROSUB 6 and is the answer not in the manual?
Questions and answers